Condensed Course

Delhi Institute of Tool Engineering – DITE Admission 2015

( Formerly Tool Room & Training Centre )

Wazirpur Industrial Area,
Delhi – 110 052,
Telephone No. : 27006129,
Email : ditesttc@yahoo.co.in,
Website : www.ditegovt.nic.in.

Delhi institute of Too! Engineering, one of the Premier institute in the country known for its quality training in the field of Too! Engineering with state of art Training facilities is offering One year- Condensed course in Tool and Die Making.

DITE Admission Eligibility Criteria 2015 :

  • 10th pass with Maths & Science.
  • Duration : 1 Year.

DITE Admission Application Form 2015 :

  • Detailed Prospectus along with DITE admission appiication form for getting the admission can be collected on any working day at the above mentioned address from Short Term Training Department from 9.00 AM to 3.00 PM. Cost of the application form is Rupee 200/-.

Important Dates for DITE Admission 2015 :

  • Last date for receipt of appiication form : 2nd January, 2015.
  • Date for written test and interview : 5th January, 2015.
  • Commencement of Course : 15 January, 2015.

 

PhD / MS / MTech Courses

Delhi Institute of Tool Engineering – DITE Admission 2013

HauzKhas,
Delhi – 110 052,
Telephone No. : 27006129,
Email : ditesttc@yahoo.co.in,
Website : www.dite.delhigovt.nic.in.

Delhi institute of Too! Engineering invites applications from the eligible candidates for admission to the following courses :

  • PhD Course
  • MS Research Course
  • MTech High Value Assistantship

DITE Admission 2013 Course Disciplines

i. DITE PhD Courses : Appl Mechanism | Biochemistry | Engineering & Biotech | Chemical Engineering | Chemistry | Civil Engineering | Computer Science & Engineering | Electrical Engineering | Hum. & Social Science | Management St. | Maths, Mech Engineering | Physics | Textile Technician.

ii. DITE MS Research Courses : Appl. Mech | Chem. Engineering | Civil Engineering | Computer Science & Engineering | Elect. Engineering | Mech. Engineering | AmarNath and Shashi Khosla School of Information Tech. | Bharti School of Telecommunication Tech. & Management.

iii. DITE MTech Courses : Chemical Engineering | Civil Engineering ( Structural Engineering only ) & Elect Engineering ( Commn. Engineering, integrated Electronics & Circuits, Power Electronics, Electrical Machines & Drives and Power Systems only )

DITE Admission 2013 Eligibility Criteria

  • A CGPA of 6.75 for General / OBC ( 6.25 for SC / ST / PH ) on a 10 point scale or equivalent or 60% marks ( 55% for SC / ST / PH ) in aggregate (of all the years / semesters of the qualifying exam ).
  • A relaxation in CGPA / marks to 6.25 ( 55% ) is also available to those with M.A. Degree in English, for admission to PhD in English. For admission to PhD / MTech / MS programmes, the GATE Score of a candidate wherever required should not be lower than the minimum prescribed viz. 300 for General / OBC and 200 for SC / ST / PH candidates.
  • For sponsored / part – time candidates the minimum experience required as on 1st January, 2014 is 2 years for PhD and 1 year for MS.

DITE Admission 2013 Application Form

i. Submission of Application is only through online procedure. Candidates are NOT required to send hard copy of the application form and bank challan. Online submission of DITE 2013 application form may be made by accessing the Institute website http://www.iitd.ac.in.

ii. Candidates belonging to General / OBC category are required to pay for each application form a fee of Rupee 225 and the candidates belonging to SC / ST / PH categories are required to pay Rupee 75.

iii. For payment of application fee the candidate will generate a bank challan for each form submitted online and make payment through challan to the nearest branch of State Bank of India after two days of generating the bank challan.

iv. The last date for submission of bank challan for payment to SBI branch is 29th December, 2013.

DITE Admission 2013 Important Dates

  • Submission of online Application commences on : 4th October, 2013.
  • Last date for submission of online application : 25th October, 2013.
  • Last date for payment of application fee to SBI through challan : 29th October, 2013.
  • Range of dates for Tests / Interviews : 2nd December, 2013 to 20th December, 2013.
  • Date for reporting at IIT Delhi for Orientation / Registration : 1st January, 2014.

 

OYCC in Tool & Die Making

Delhi Institute of Tool Engineering 2013 Admission

Government of National Capital Territory of Delhi,
Delhi Institute of Tool Engineering,
Wazirpur Industrial Area,
Delhi – 110 052,
Phone No . : 011 – 27372618, 27006121, 27006120,
Fax No. : 011 – 27377440,
Website : http://www.dite.delhigovt.nic.in/.

Delhi institute of Too! Engineering invites applications from the eligible candidates for the following courses :

  • Advanced Technician Course ( 1 Year )
  • Condensed Course in Tool & Die Making ( 1 Year )

DITE Admission 2013 Eligibility Conditions

i. Tool Room Machine Operator ( TRMO ) & Tool Room Machine Die Fitter ( TRDF )

  • TRMO & TRDF Admission Qualification : Matriculation & ITI in trades of Turner / Miller / Grinder / Machinist For TRMO course & Tool and Die Maker / Fitter for TRDF Course.
  • TRMO & TRDF Admission Age Limit : 24 Years as on 1st October, 2013 – ( 2 Years relaxation for SC / ST / PH ).

ii. One year Condensed Course in ( OYCC ) Tool & Die Making

  • OYCC Admission 2013 Qualification : Matriculation with Maths & Science.
  • OYCC Age Limit : N/A

DITE 2013 Admission Courses

SectionSubjectNo. of QuestionsMarks
AMathematics / Biology40120
BPhysics3090
CChemistry3090
Total100300

DITE Admission 2013 Mode of Selection

  • Delhi Institute of Tool Engineering 2013 Written Test / Interview on 18th November, 2013.

DITE 2013 Admission Form

  • The Prescribed Application form and prospectus can be obtained from the above address from 9.00 AM to 3.00 PM on any working day on payment of Rupee 100/- for ATC & Rupee 200/- for OYCC in cash or Demand Draft in favour of ‘Delhi Institute of Tool Engineering, Delhi’.
  • The last date for submissions of duly filled application form is 3.00 PM on 15th November, 2013.

 

Skill Development Training Programs

Delhi Institute of Tool Engineering – DITE Admission 2013

Society For Self Employment

( Industries Department, Government of NCT of Delhi ).

Wazirpur Industrial Area,
Delhi – 110 052, India.
Phone No. : 011 – 27006129, 27006130,
Mobile No. : 88003 – 61306,
Email : ditesttc@yahoo.co.in, secdite@gmail.com,
Website : www.dite.delhigovt.nic.in.

Training Under Self Employment and Skill Development Training Programs ( Full Time & Part Time )

Delhi Institute of Tool Engineering, the centre for excellence in the field of Tool Engineering and Society for Self employment offers development training program in the following fields for creating Self Employment Opportunities :

Program NameEligibility Criteria for AdmissionDurationNature of ProgramProfessional / Non - ProfessionalIntake
Department of Statistics Faculty of Science Phone No. : 0484 - 2575893
MSc StatisticsBSc degree in Mathematics or Statistics main with at least 55% marks for optional subjects taken together.4 SemestersRegular - DayNon - Professional20
MTech Engineering StatisticsBTech or equivalent degree or AMIE in any discipline or AMII with a first class ( 60% ) from any recognized University or institution with valid GATE score.4 SemestersRegular - DayProfessional8

Programme NameEligibility Criteria for AdmissionDurationNature of ProgrammeProfessional / Non - ProfessionalIntake
Department of Physical Oceanography, Faculty of Marine Sciences, Ph : 0484 - 2363950
M.Sc. OceanographyB.Sc.degree with Physics / Mathematics as the main subject with 55% marks. Those with Mathematics as the main subject should have studied Physics as one of the subsidiaries and vice-versa.4 Sem.Regular-DayProfessional15
M. Tech. Ocean Technology(i) M.Sc. degree in Oceanography / Physics / Marine Geology / Meteorology / Marine Geophysics / Environmental Sciences or M.Sc. ( Tech ) Degree in Marine Geophysics or
B.Tech
or
equivalent degree / AMIE in Civil Engineering / Environmental Sciences with 60% marks from any recognized University or Institution.

(ii) A valid GATE score with any of the subjects mentioned above as the second paper.
4 Sem.Regular-DayProfessional12

 
 

10 thoughts on “Delhi Institute of Tool Engineering – DITE Admission 2015

  1. sir i want to job related to mechanical product designing, i m 6th month experience of cadd center service rohtak

  2. sir I want to take in admission in catia short time training courses .please provide me detail for this immediately

  3. respected sir plz provide information about tool enginerring and its future with last date of submission of ent.form for iti diploma

  4. please provide the details of part time courses, that a working person do.
    actually i have done iti in tool & die maker in 2007 from nand nagari.
    Now, currently i am working as a autocad operater cum draughtsman.
    Please guide.

Leave a Reply

Your email address will not be published. Required fields are marked *