MSME Tool Room Aurangabad Admission

Admission Notification »

MSME Tool Room Aurangabad Admission 2018

MSME Tool Room Aurangabad invites application from eligible candidates for admission to the following Long Term Courses for academic sessions 2018 – 2019.

MSME Tool Room Aurangabad Admission Eligibility 2018

CourseDurationIntakeQualificationAgeCourse Fees / Per Annum
ADVANCE DIPLOMA IN TOOL & DIE MAKING ( AICTE / MSBTE Approved )Four Years6010th / SSC Passed with Science and Maths with 60% marks in aggregate of all subjects ( 50% for the candidates belonging to SC / ST category )15-19 years as on 1/7/2018 ( 3 years relaxation for SC / ST candidates )Rs.42,000/-
DIPLOMA IN MECHATRONICS ( AICTE / MSBTE Approved )Three Years60Rs.42,000/-
CERTIFICATE COURSE IN MACHINIST ( TOOL ROOM ) ( NSQF Level 5 )Two Years40Rs.35,000/-

Reservation in seats to SC / ST / OBC / PH are applicable as per rules, subject to production of authentic Certificates. No Tuition Fee will be charged to SC / ST candidates, however other fees as applicable will be charged. Admissions are open to Boys & Girls.

MSME Tool Room Aurangabad Admission Procedure 2018

Selection will be made through On-line Entrance Examination to be conducted at Aurangabad.

The list of successful candidates of Online Entrance Examination in the order of merit, will be declared on website ( www.igtr-aur.org ) and displayed at IGTR Notice Board on scheduled date as mentioned. The candidate, who meets the eligibility criteria of Educational Qualification – Percentage of Marks ( aggregate of all subjects ) in SSC Examination, Age Limit and Caste Certificate ( for Reserve Categories ) as mentioned above shall be given admission as per institute norms.

Candidates, who have appeared for 10th / SSC examination 2018 may also register for On-line Entrance Examination, however his/her admission to the course is subject to meeting eligibility criteria as mentioned above.

In case of seats for the course of “Certificate Course in Machinist ( Tool Room )” falls vacant, then the vacant seats will be filled up from the candidates who has appeared for the other two courses i.e. “Advance Diploma in Tool & Die Making” and “Diploma in Mechatronics” as per merit.

MSME Tool Room Aurangabad Admission Application Form 2018

Candidate willing to register for any of the course mentioned above will have to register his / her candidature through the On-line Registration process through the link available on the web site www.igtr-aur.org. The application in the prescribed proforma should be filled online. The candidate has to make the payment for registration to On-line Entrance Examination through the link provided in the On-line Registration Process.

The Registration Fee of [rupee] 700/- ( [rupee] 350/-in case of SC / ST candidates ) plus applicable taxes is to be paid by individual candidate for a single course. Candidates are given choice to register for multiple courses. Candidates willing to register form ore than one course will have to make additional payment for each course as applicable. Registration Fee is non-refundable. Candidates will be allowed to appear for On-line Entrance Examination after successful submission of online registration. The admit card to appear for On-line Entrance Examination can be downloaded on successful completion of online registration process.

Important Dates for MSME Tool Room Aurangabad 2018

EventDate
Commencement of online registration11th May, 2018
Last date for online registration3rd June, 2018
Online Entrance Examination10th June, 2018
Result of Online Entrance Examination12th July, 2018
Admission / Counselling Schedule18th to 30th June, 2018
Commencement of Course2nd July, 2018

Contact Details

P – 31, MIDC, Chikalthana Industrial Area,
Aurangabad – 431 006,
Maharashtra State, India,
Phone No. : 0240 – 2486832, 2482593, 2470541,
Fax : 0240 – 2484028,
Email : gm@igtr-aur.org,
Website : www.igtr-aur.org.

MSME Tool Room Aurangabad Admission 2018

Applications are invited in the prescribed form for admission to the following Medium Term Courses 2018 at Aurangabad, Pune & Nagpur. Applications are invited from the eligible students in the prescribed form for admission into the following full time NSQF Complaint Medium Term Courses commencing from January-2018

MSME Tool Room Aurangabad Eligibility 2018

CourseCourse ContentsDurationReg.FeeSecurity DepositCourse FeesEligibility
MASTER CERTIFICATE COURSE IN CAD / CAM ( NSQF LEVEL-6 )CAD ( Auto CAD & Solid Works )
CAD & CAM ( Unigraphics CAD & CAM )
Advance CAD ( CREO & CATIA )
CNC Programming & CNC Machining
CAE ( Ansys )
Entrepreneurship
Course -Work : Project
6 MonthsRs.600/-Rs.3000/-Rs.40,000/-Degree / Diploma in Engineering ( Mechanical / Production / Automobile ) – Pass or appearing
MASTER CERTIFICATE COURSE IN TOOL DESIGN ( NSQF LEVEL-6 )CAD ( Auto CAD & Solid Works )
CAD & CAM ( Unigraphics CAD & CAM )
Design of jigs & Fixtures,
Design of Press Tools
Design of Moulds
Design of Die Casting Dies
Entrepreneurship
Course -Work : Project
6 MonthsRs.600/-Rs.3000/-Rs.40,000/-
  • Registrations for the above courses are under progress. Contact ATC for more information or download the registration forms from the website below. Submit the form at ATC.
  • Commencement of the courses : 1st Jan’ 18, 5th Feb’ 18 and 5th Mar’ 18

MSME Tool Room Aurangabad Application Form 2018

Eligible candidates will be offered admission on First-Come-First-Serve basis on receipt of registration fee along with duly filled-up application form and following documents

Document Required

( Photocopies of )

  • SSC /10 th Pass Certificate
  • Aadhar Card
  • Eligibility Qualification Certificate,
  • Caste Certificate & Caste Validity Certificate ( If Applicable )
  • Two Passport Size Photographs
  • Bank passbook

Payment of Fees

All the fees ( Registrations fees ( Non Refundable ) / Security Deposit / course fees ) should be deposited in the SBI Power Jyoti Account ( Account No. 34008490415  ) at any branch of State Bank of India in the form of challan . Registration fee is to be paid at the time of registration to the course. Balance fee ( Course fee ) to be paid on confirmation of the admission to the course by ATC. Online payment facility is also available on the website.

  • Reservation as per Govt. of India norms for SC / ST candidates, for whom no tuition fee / Course fee will be charged subject to Production of authentic Caste certificate.
  • Caste Certificate and all necessary educational certificates in original form issued by competent authority is to be produced for verification at the time of admission which may be re-verified from the issuing authority if required.
  • Admission to the course will be confirmed on receipt of registration fee along with duly filled registration form, attested copies of the educational qualification & caste certificate as applicable.
  • Security deposit will be refunded only on successful completion of the course.
  • For Master Certificate Course in CAD / CAM, 15 days training will be conducted at IGTR Aurangabad for which free lodging in IGTR hostel will be done by IGTR Aurangabad. However to & fro travel expenses and expenses towards food will have to borne by candidates.
  • ATC reserves right to incorporate changes in course content, duration, fee, may cancel the proposed scheduled dates due to any reasons without notice.

Contact Details

Contact for Admissions at Sub Centre's Contact for Admissions at Aurangabad (Head Office)
IGTR - MSME DI CAD / CAM Training Centre,
Shankarshet Road,
Near PMT Workshop, Swargate,
Pune - 411 037, M.S.,
Telephone No. : ( 020 ) 24440861,
Fax : ( 020 ) 24440862,
Email : igtr_pune@yahoo.co.in.
IGTR CAD/CAM Training Centre,
Plot no P-142, MIDC Industrial Area, Hingana,
Nagpur - 440 006, M.S.,
Telephone No. : ( 07104 ) 645114,
Fax : ( 07104 ) 645114,
Email : training_ngp@igtr-aur.org.
P - 31, MIDC, Chikalthana Industrial Area,
Aurangabad - 431 006,
Maharashtra State ( India ),
Phone No. : ( 0240 ) 2486832, 2482593, 2470541, 2480578,
Fax : ( 0240 ) 2484028,
Gram "IGTOOLS",
Email : gm@igtr-aur.org ,
Website : http://www.igtr-aur.org .

MSME Tool Room Aurangabad Admission 2014

Indo German Tool Room,
P-31, M.I.D.C. Industrial Area,
Chikalthana, Aurangabad – 431 006,
Maharashtra, India.
Phone No. : 91 – 240 – 2486832, 2470541, 2482593,
Fax No. : 91 – 240 – 2484028,
Email : gm@igtr-aur.org,
Website : http://igtr-aur.org/.

MSME Tool Room Aurangabad invites application from Engineering Students & Professionals for admission to the following Winter Vacation Courses for academic sessions 2014 – 2015.

In Engg / Tech, Pharmacy and Architecture Courses :
Sl.NoNature of Institutions Applicability of Reservation Rule for SC / ST / OBC - B / PwD Category of Students
1.University / University Departments Concerned University Rules shall be followed.
2.Government Engineering & Technology and Pharmacy Colleges
Reservation Rules of the State Government shall be followed
3.Government Aided Self Financing Engineering / Technology Colleges Reservation Rules of the State Government shall be followed
4.Un-Aided Self Financing Engineering / Technology / Pharmacy Colleges
Reservation of seats shall be available for students as may be desired by concerned Institution Authority.
In Medical and Dental Courses :
1.Government Medical / Dental CollegesReservation Rule of State Government shall be followed
2.Private & Self Financing Medical / Dental Colleges
Reservation of seats shall be available for students as may be desired by concerned Institution Authority

MSME Tool Room 2014 Winter Vacation Course Admission

  • 22.5% Seats are reserved fir SC / ST candidates. Batch size will be 20 trainees per batch.
  • No Course fees will be charged for SC / ST candidates subject to production of authentic caste certificate.
  • Admission to the course will be confirmed on receipt of registration fee along with duly filled registration form, attested copies of the educational qualification & caste certificate as applicable.
  • Registration Fee ( [rupee] 300/- non-refundable ) & Course Fee should be deposited in SBI Power Jyoti Account ( Ac. No : 34008490415 ) at any Branch of State of India in the prescribed form ( available on the website http://igtr-aur.org/ )

MSME Tool Room Aurangabad Admission 2013

Indo German Tool Room,
P-31, M.I.D.C. Industrial Area,
Chikalthana, Aurangabad – 431 006,
Maharashtra, India.
Telephone No. : 91 – 240 – 2486832, 2470541, 2482593,
Fax No. : 91 – 240 – 2484028,
Email : gm@igtr-aur.org,
Website : http://igtr-aur.org/.

MSME Tool Room Aurangabad invites application for admission to Medium I Part Time Term Courses for the academic year 2013. Career Oriented / Skill Development Programs For Degree I Diploma Holders At Aurangabad, Pune & Nagpur.

S.NoStateCity/TownDate of SelectionsVisiting TeamContact Numbers
1 MaharashtraPune15th April, 2015Dr. M. Jyothsna & Ms. D. Neeharika & Mr.Sidharth BihaniSiddarth - 07660000665 & Neeharika -07660000663
2 Mumbai16th April, 2015
3 Gujarat Vadodara18th April, 2015
4 Metro Cities New Delhi20th April, 2015
5Uttar PradeshLucknow22nd April, 2015
6BiharPatna24th April, 2015
7 ChhattisgarhKorba26th April, 2015
8 Bilaspur27th April, 2015
9Bhilai28th April, 2015
10 Raipur29th April, 2015
11Orissa Berhampur15th April, 2015Prof.M. Leben Johnson & Mr. MVVN MurtyMurthy - 7660000662
12 Damanjodi16th April, 2015
13Bhubaneswar17th April, 2015
14 Sambalpur18th April, 2015
15 Cuttack19th April, 2015
16 Rourkela20th April, 2015
17 West BengalKharagpur21st April, 2015
18 Kolkata22nd & 23rd April, 2015
19Asansol24th April, 2015
20Durgapur25th April, 2015
21JharkhandSiliguri26th April, 2015
22 Dhanbad28th April, 2015
23Bokaro29th April, 2015
24Ranchi30th April, 2015
25Jamshedpur1st May, 2015
26KarnatakaBangalore1st May, 2015Prof. G. Raghavaiah & Mr. KevinKevin - 7660000661
27KeralaKochi3rd May, 2015
28Trivendrum4th May, 2015
29TamilnaduChennai6th May, 2015
30Andhra PradeshTirupati7th May, 2015Visiting TeamDr. P. Manju Sree Naidu & Ms.S.Purnima
31Kurnool8th May, 2015
32TelanganaHyderabad9th - 11th May, 2015
33Andhra PradeshSrikakulam17th May, 2015Visiting TeamDr. P. Manju Sree Naidu & Ms.S.PurnimaPurnima -7660000664
34Vizianagaram18th May, 2015
35Kakinada19th May, 2015
36Rajahmundry20th May, 2015
37Vijayawada21st - 22nd May, 2015
38Khamam23rd May, 2015
39Guntur24th May, 2015
40Ongole25th May, 2015
41Nellore26th May, 2015
42Andhra PradeshVisakhaptnam11th May, 2015Ms. S. Geetha Mani
43Visakhaptnam16th May, 2015
44Visakhaptnam6th May, 2015

MSME Tool Room 2013 Registration

22.5% ( are reserved for SC / ST candidates for whom no course fee will be charged subject to production of authentic Caste Certificate. Registration fees of [rupee] 3000/- for Medium / Part time courses will be charged, which will be refunded on successful completion of the course. Other Fee ( Administrative Expenses ) of [rupee] 800/- for Medium / Part time will have to be paid by all candidates.

Institute reserves the right to Incorporate changes in course contents, duration etc. without notice

  • Registration of the courses starts from : 11th November, 2013
  • Commencement of the Courses on : 18th November, 2013

Contact for Admissions at following Centers :

Indo German Tool Room, Aurangabad,
P-31Midc, Cnikalthana Industrial Area,
Aurangabad 431 006 M.S. ( India ),
Telephone No. : ( 0240 ) 2486832 2482593, 2470541,
Fax No. : ( G240 ) 2484028 Gram ‘IGTOOLS”,
Email : Hraining@igtr.aur.org.

IGTR- MSME Dl CAD/CAM Training Centre,
Shankarshet Road. Near PMT Workshop,
Swargate, Pune 411 037 M.S.
Telephone No. : ( 020 ) 24440861,
Fax No. : ( 020 ) 24440862,
Email : igtr_pune@yahoo.co.in.

Indo German Tool Room,
Aurangabad, Extension Center Nagpur,
P tot No P- 142, MIDC Industrial Area,
Hingana Nagpur 440 006, M.S.
Telephone No. : ( 07104 ) 645114,
Fax No. : ( 07104 ) 645114,
Email : training_ngp@igtf-aur.org.

[tabbyending]