Admission Notification : MSME Tool Room Hyderabad Admission 2015

MSME Tool Room Hyderabad Admission 2015

ADVERTISEMENT

MTech Course 2015

CENTRAL INSTITUTE OF TOOL DESIGN,
( A GOVT. OF INDIA SOCIETY – MINISTRY OF MSME ),
Balanagar, Hyderabad – 500 037.
India.
Telephone No. : 23771959, 23776178,
Fax No : 040-23772658,
E-mail : citdadmissions@citdindia.org,
Website : http://www.citdindia.org/.

The Central Institute of Tool Design invites Applications in the prescribed format for admissions into the Long Term 2 year Master of Technology ( Mechatronics ) course conducted under Industry-Institution joint program with JNTU, Hyderabad, Approved by AICTE, commencing from OCTOBER, 2015.

CITD MTech 2015 Exam Date :

CITD 2015 MTech Entrance Exam Date : 19th September, 2015

CITD MTech Eligibility Criteria :

B.E. / B. Tech. in Mech.ECE/EEE/EIE/Mechatronics/Automobile/Aeronautical Engg.) or equivalent. Minimum of 55% marks in the Qualifying examination from the Institutions approved by AICTE.

Age : No age limit. However, candidates below 45 years of age are preferred.

CITD 2015 Eligibility for Industry sponsored candidates :

The candidates must have a minimum of two years of full-time professional work experience after passing the qualifying examination in a Registered Firm / Company / Industry / Educational and Research Institutions / Govt. Department / Autonomous organizations in the relevant field in which admission is being sought.

A letter from the employer must be furnished sponsoring the candidate for admission into M.Tech. ( Mechatronics ). The employer should also indicate that the candidate sponsored will not be withdrawn midway till the completion of the M.Tech. course.

CITD MTech Seats 2015 :

25 seats (15 General+3 SC+1 ST+1 PH Selfsponsored+ 5 Industry Sponsored) + ( 7 Non Creamy Layer OBC Category SUBJECT TO APPROVAL FROM JNTUH)

CITD MTech Syllabus for Entrance Exam 2015 :

The Paper will be of 100 objective type questions with a duration of 2 hrs

  • Electrical engineering
  • Fluid mechanics & Hydraulic System
  • Thermal engineering
  • Production Technology
  • Basic & Digital Electronics
  • Metallurgy & Material Science
  • Measurements & Instrumentation
  • Control Systems
  • General Aptitude ( Analytical & Reasoning )

CITD MTech Selection Procedure 2015 :

  • Candidates under all categories will be selected based on the rank obtained in the Entrance examination.
  • Reservation for SC/ST/PWD quota exists as per Govt. of India norms.

How to apply for CITD MTech 2015 Important Dates :

A) Application form and prospectus can be obtained from the following address on any working days between 9:30 AM and 5:00 PM.( Weekly holiday on Sunday) by paying application cost prescribed by Bank Challan or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37.
Training Department,
MSME Tool Room /Central Institute of Tool Design,
Balanagar, Hyderabad – 500 037,

B) Application form can also be downloaded from our website www.citdindia.org and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director, CITD, Hyderabad.

C) Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. However, preference will be given to those candidates whose age is below 45 years. Seats will be allotted strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category.

Cost of Application : Rupee 800/- for general category and Rupee 400/- for SC/ST category candidates and for PWD candidates fully exempted. However SC/ST/PWD category candidates need to enclose proof of their category duly attested by a Gazetted Officer.

CITD MTech Important Dates 2015 :

  • Commencement of issue of Applications : 05th August, 2015
  • Last date for submission of filled-in application ( upto 5.00pm at CITD )  : 05th September, 2015
  • Last date for submission of filled-in application with late fee Rupee 500/- : 12th September, 2015
  • Tentative Date of entrance examination : 19th September, 2015 at 11.00a.m. at JNTUH, Kukatpally, Hyderabad

 

PG Courses 2014

MSME Tool Room Hyderabad Admission 2014

( A Government of India Society Ministry of MSME )

Balanagar, Hyderabad – 500 037, India,
Telephone No. : 91 – 40 – 2377 2747,
Fax : 91 – 40 – 23772658,
Email : citdcadcam@citdindia.org,
Website : www.citdindia.org.

Central Institute of Tool Design Hyderabad invites application from eligible candidates for admission to Long Term Courses commencing from August 2014.


MSME CITD Hyderabad Admission Selection Procedure 2014 :Engineering Entrance Exam Question Bank CD

  • The selection of all categories of candidates for the admission to the various courses is done through Counselling based on the merit obtained in the Entrance Test. Course fee is payable on Counselling day and the fee once paid will not be refunded. The trainees should deposit caution
    money of Rupee 1,000/- which will be refunded on successful completion of the course and not before under any circumstances.

MSME CITD Hyderabad Admission Application Form 2014 :

  • Application form and prospectus can be obtained from Training Department, MSME – Tool Room / Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.( Weekly holiday on Sunday ) by paying application cost prescribed by cash or a crossed demand draft drawn in favor of Principal Director, CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37. Last date for receipt of filled – in applications is 25th June, 2014.
  • MSME CITD Hyderabad Online admission application form can be available from Central Institute of Tool Design Hyderabad website : www.citdindia.org.
  • Send completed MSME CITD Hyderabad admission application along with a DD in favor of “Principal Director, CITD”, payable at Hyderabad”.
  • Filled MSME CITD Hyderabad admission application post by sent to the following address :
    Director( Trg ), MSME Tool Room,
    Central Institiute of Tool Design,
    Balanagar, Hyderabad – 500 037.

Important Dates for MSME CITD Hyderabad Admission 2014 :

  • Last date for submission of filled in applications : 25th June, 2014.
  • Last date for submission of filled in applications with late fee of Rupee 500/- : 30th June, 2014.
  • Tentative Date of Entrance Test : 7th July, 2014.
  • Declaration of Results : 16th July, 2014.
  • Date of first Counselling : 22nd July, 2014.
  • Date of second Counselling : 29th July, 2014.

 

M – CAD / CAM

MSME Tool Room Hyderabad Admission 2014

Central Institute of Tool Design

Balanagar, Hyderabad – 500 037,
Phone No. : 23772749, 23776178,
Mobile No. : + 91 99897 10105, + 91 94409 63987,
Email : citdcadcam@citdindia.org,
Website : www.citdindia.org.

MSME Tool Room Hyderabad invites application from eligible candidates for admission to Master Certificate in CAD / CAM – ( M – CAD / CAM ) programs 2014.

Course Contents :

  • AUTOCAD : 2D, 3D Modeling.
  • SOLIDWORKS : Modeling, Surfacing, Assembly & Drafting.
  • AUTODESK INVENTOR : Modeling, Assembly & Drafting.
  • PRO / ENGINEER : Modeling, Surfacing, Assembly, Drafting, Mechanica & Manufacturing.
  • CATIA : Modeling, Surfacing, Assembly, Drafting & Sheet metal.
  • UNIGRAPHICS : Modeling, Surfacing, Assembly, Drafting & Manufacturing.
  • MASTERCAM : Design, Turning & Milling.
  • ANSYS : Structural, Thermal Analysis & CFX.
  • HYPERMESH : Shell Mesh and Solid Mesh.
  • DELCAM : Design & Milling.
  • NC, CNC Programming : Using CNC Desktop Mill and Lathe Machines.
  • Project Work

Course Fee : Rupee 40000/- + Rupee 500/- Reg. Fee for SSI & Individuals, Rupee 60000/- + Rupee 500/- Reg. Fee for Govt.Org. & Major Industries.

Duration : Months, full time 6 hrs / day, Night lab facility.

Eligibility : Degree / Diploma in Mechanical Engineering or Equivalent.

  • Admissions for 3 months and 1 Month are also under Progress.
  • Information for the above courses are also available at Vijayawada Sub centre and Extension centre Chennai.
  • Application & course details can be had from MSME Tool Room Hyderabad website www.citdindia.org or at CITD, Hyderabad / Vijayawada / Chennai.

Sub Centre :

54 – 2 – 9, Phase III,
Autonagar, Vijayawada – 520 007,
Phone No. / Fax : 0866 – 2540560,
Mobile No. : + 91 98854 29054.

Extension Centre :

MSME – DI Campus,
65/1 GST Road, Guindy,
Chennai – 600 032,
Phone No. / Fax : 044 – 25000366,
Mobile No. : + 91 93448 48418.

 

MCTE

MSME Tool Room Hyderabad Admission 2014

Central Institute of Tool Design

Balanagar, Hyderabad – 500 037,
Phone No. : 23772749, 23776178,
Mobile No. : + 91 99897 10105, + 91 94409 63987,
Email : citdcadcam@citdindia.org,
Website : www.citdindia.org.

MSME Tool Room Hyderabad invites application from eligible candidates for admission to Master Certificate in Computer Aided Tool Engineering ( MCTE ) programs 2014.

Course Contents :

  • AutoCAD : 2D, 3D Modeling
  • Solidworks : Modeling, Surfacing, Assembly & Drafting.
  • Pro / E : Modeling, Surfacing, Assembly, Drafting, Mould, Sheet-metal, Mechanica & Manufacturing Mechanism.
  • Catia : Modeling, Surfacing, Assembly, Drafting & Sheet metal.
  • Unigraphics : Modeling, Surfacing, Drafting, Assembly & Manufacturing.
  • MasterCAM : Design, Turning & Milling.
  • Ansys : Structural, Thermal Analysis & CFX.
  • Hypermesh : Shell Mesh and Solid Mesh.
  • DelCAM : Design & Milling.
  • NC, CNC Programming : Using CNC Desktop Mill and Lathe Machines.
  • Tool Design : GD&T & Design Practice, Tooling Materials, Press Tools, Plastic Moulding Tools, Die Casing Dies, Jigs and Fixtures & Cutting Tools.
  • Metrology & Reverse Engineering : CNC CMM Machine, Reverse Engineering Concepts & Digitization.

Course Fee : Rupee 40000/- + Rupee 500/- Reg.Fee for SSI & Individuals, Rupee 60000/- + Rupee 500/- Reg.Fee for Govt.Org. & Major Industries.

Duration : Months, full time 6 hrs / day, Night lab facility.

Eligibility : Degree / Diploma in Mechanical Engineering or Equivalent.

  • Admissions for 3 months and 1 Month are also under Progress.
  • Information for the above courses are also available at Vijayawada Sub centre and Extension centre Chennai.
  • Application & course details can be had from MSME Tool Room Hyderabad website www.citdindia.org or at CITD, Hyderabad / Vijayawada / Chennai.

Sub Centre :

54 – 2 – 9, Phase III,
Autonagar, Vijayawada – 520 007,
Phone No. / Fax : 0866 – 2540560,
Mobile No. : + 91 98854 29054.

Extension Centre :

MSME – DI Campus,
65/1 GST Road, Guindy,
Chennai – 600 032,
Phone No. / Fax : 044 – 25000366,
Mobile No. : + 91 93448 48418.

 

Summer / Vacational Courses 2014

MSME Tool Room Hyderabad Admission 2014

Central Institute of Tool Design

Balanagar, Hyderabad – 500 037,
Phone No. : 040 – 23772749, 23776178, 23772748,
Fax : 040 – 23772658,
Mobile No. : + 91 99897 10105,
Email : citdcadcam@citdindia.org,
Website : www.citdindia.org.

MSME Tool Room Hyderabad invites application from eligible candidates for admission to  Summer / Vacational Courses on CAD / CAM, Automation, VLSI and Micro Controllers Courses 2014.

S No.
Course Title
Duration
Fee per Participant
1.
AutoCAD ( 2D & 3 D Modeling )
1 Week, 3 hrs / day
For S No. 1 & 2 Rupee 3,500/-
2.
CNC Programming ( Milling & Turning )
1 Week, 3 hrs / day
3.
Pro – E / Creo ( Modeling, Assembly & Drafting )
1 Week, 3 hrs / day
For any two software courses from S No.3 to S No. 10
or
Any one software course along with S No. 7 & S No. 2
Rupee 7,000/-
4.
Catia ( Modeling, Assembly & Drafting )
1 Week, 3 hrs / day
5.
Solidworks ( Modeling, Assembly & Drafting )
1 Week, 3 hrs / day
6.
Ansys ( Structural & Thermal Analysis )
1 Week, 3 hrs / day
7.
Hypermesh ( Shell Mesh & Solid Mesh )
1 Week, 3 hrs / day
8.
Unigraphics ( Modeling, Assembly & Drafting )
1 Week, 3 hrs / day
9.
Delcam ( Design & Milling )
1 Week, 3 hrs / day
10.
Mastercam ( Design, Turning & Milling )
1 Week, 3 hrs / day
11.
A course on Mechatronics
1 Week, 3 hrs / day
Rupee 5,000/-
12.
A course on Verilog
1 Week, 3 hrs / day
Rupee 5,000/-
13.
A course on VHDL
1 Week, 3 hrs / day
Rupee 5,000/-
14.
A course on Micro controller
1 Week, 3 hrs / day
Rupee 5,000/-

MSME Tool Room Hyderabad Admission Eligibility Criteria 2014 :

  • Students pursuing B.E / B. Tech or Diploma in Mechanical / Production / Electrical / Electronics / Instrumentation / Automobile / Aeronautical Engineering.

Note :

  • The above Courses will be Commenced on every Wednesday from April to July / December to Jan.
  • For 3rd year students Mini Projects & Inplant Training will be provided to all the Participants.
  • For SC / ST candidate’s fee wavier will be provided as per Govt. of India norms.
  • Limited Hostel facilities is available on chargeable basis.
  • For Admissions, students should come along with college Bonafide Certificate, College ID, Photo ID card issued by Govt. & Passport Size Photographs.

Sub Centre :

54 – 2 – 9, Phase III,
Autonagar, Vijayawada – 520 007,
Phone No. : 0866 – 2540560,
Mobile No. : + 91 98854 29054.

Extension Centre Vishakhapatnam :

Govt. ITI College Campus, Kancharalapalam,
Visakhapatnam.
Mobile No. : +91 90599 10881

Extension Centre Chennai :

MSME – DI Annexe Building,
65 / 1 GST Road, Guindy,
Chennai, Tamil Nadu, India,
Phone No. : 044 – 22500366,
Mobile No. : + 91 93448 48418.

Extension Centre Kolar :

Shed No D – 31, 32, KSIDC,
Industrial Estate,
Kolar Gold Field, Karnataka.
Mobile No. : +91 89701 48758

 
 

TAGS: , , , , , , , , , ,

CITD MTech Exam – MSME Tool Room Hyderabad 2015 Offering Courses – CAD / CAM Courses – MSME CITD Hyderabad Admission 2015 Eligibility Criteria – MSME CITD Hyderabad 2015 Admission Selection Procedure – MSME CITD Hyderabad 2015 Admission Application Form – Important Dates for MSME CITD Hyderabad Admission 2015

Admission Notification Related : CITD MTech Admission Notification 2015, MSME Central Institute of Tool Design Hyderabad Admission 2015, CITD MTech Entrance Exam Date 2015, MSME Tool Room Hyderabad Admission 2015, MSME CITD Syllabus for MTech 2015, CITD 2015 Admission Form Hyderabad, CITD MTech Application Form 2015, MSME Hyderabad Summer / Vacational Courses Courses Admission 2015, CITD Requirement for Summer / Vacational Courses Admission 2015, MSME CITD Hyderabad Admission Eligibility 2015, MSME CITD Hyderabad Admission Procedure 2015, Central Institute of Tool Design Hyderabad ME / MTech Admission 2015, MSME CITD Master Certificate Course Admission Application Form 2015, CITD Hyderabad Master Certificate Courses CAD / CAM Admission 2015, MSME CITD Hyderabad 2015 Online Admission Form, MSME CITD Hyderabad Automation Course 2015 Admission Requirements, MSME CITD Hyderabad 2015 Admission Application Process, MSME CITD Hyderabad 2015 Important Dates, MSME CITD Hyderabad Admission 2015 Eligibility, MSME CITD Hyderabad 2015 Admission Notification, MSME CITD Hyderabad Admission 2015 Selection Procedure, MSME Tool Room Hyderabad 2015 Admission for Master Certificate Courses, MSME CITD Hyderabad PG & PD Courses Admission Form, MSME CITD Hyderabad Syllabus for Admission 2015, Important Dates for MSME CITD Hyderabad Admission 2015, VLSI and Micro Controllers Eligibility for MSME CITD Hyderabad 2015 Admission, Qualification for MSME CITD Hyderabad Post Diploma in Tool Design Admission, MCET / M - CAD / CAM Admission 2015,

Posted In admission notification : Leave a response for msme tool room hyderabad admission 2015 by vennila

Leave a Comment for MSME Tool Room Hyderabad Admission 2015









11 Responses to “MSME Tool Room Hyderabad Admission 2015”

  • sir i wil complete my b.tech in 2015 .In january can i join for catia and autocad or any other course
    By nikitha from hyderabad on January 11, 2015 at 5:13 pm
  • Sir can I know the qualifying marks to have admission in m.tech(design engineering),and also syllabus for entrance exam
    By upender reddy from mahabubnagar on January 5, 2015 at 9:57 pm
  • Sir I pursuing b.tech final year from mechanical engineering.and I want to take admission in this institute.so please tell me full information.
    By Atul Singh from up,Shahjahanpur on January 3, 2015 at 8:54 pm
  • sir/ma'am its Archana from Nashik(Maharashtra).I have completed B.E EnTc from Mumbai university 2015 passout.I want to join mechatronics course.please give me details information about the course. thank you
    By archana from nashik,Maharashtra on December 20, 2014 at 2:20 pm
  • hello sir iam m suresh i gave done by b tech 2015.sir iam intersting to learn cad/cam...may i full details about this course....plz sir give the full information...
    By mamidi suresh from vizag on September 25, 2014 at 3:11 am
  • i am graduate mechanical engineering so how citd gain the seet and which syllabus prepare in citd exam......
    By mamidi suresh from vizag on September 25, 2014 at 3:04 am
  • Sir,my name is Teja and i missed msme citd (Hyderabad) entrance exams and i want to join msme citd (Hyderabad) for doing my M.Tech in mechatronics i got 81.67 % in my B.tech(Mechanical). if any chance is there please inform to me sir i am waiting for yours reply . . . .
    By Teja Dommaraju from nellore,andhra pradesh on September 1, 2014 at 6:47 pm
  • plese send qulyfy marks (entrence test)
    By narapareddy parthasaireddy from tadipatri , anantapur dist , anadhrapradesh on July 11, 2014 at 12:12 pm
  • plese send qulyfy marks
    By narapareddy parthasaireddy on July 11, 2014 at 12:09 pm
  • Hello sir, Am anurag from anurag reddy. i have done my b.tech 2015. sir am interesting to learn vlsi.. may i know full details about this course and from on words courses will start.? plz sir if u dont mine give the complete information about the course..?
    By Anurag Reddy from Hyderabad on October 30, 2013 at 9:59 pm
  • Dear sir We haven't yet received the results of entrance exam 2015 for (PDTD) that was conducted on 31 of JULY at OSMANIA UNIVERSITY (Hyderabad).As per the institution authorities, result announcement will be done in one week ,but according to me today is the 8th day after the entrance.....!
    By Kiran babu from thrissur ,kerala on August 8, 2012 at 10:39 am