Admission Notification : NSIC Technical Services Centre Admission 2013

NSIC Technical Services Centre Admission 2013

ADVERTISEMENT

Skill Development Programs

NSIC Technical Services Centre Admission 2013

( A Government of India Enterprise )

B – 24, Ekkaduthangal,
Chennai – 600 032,
Phone No. : 044-22252335,
Fax : 044 – 22254500,
Email : chentrg@nsic.co.in,
Website : www.nsic.co.in.

NSIC Technical Services Centre invites admission application for Skill Development Training Programs to be more employable 2013.

• Age : 18 to 35 years. Relaxation for SC / ST /PH / Ex – servicemen as per rules. Service tax extra as applicable.
• Send Bio – data on plain paper mentioning the course name, Email ID / Phone No. with copies of certificates and a Demand Draft for 250/- drawn in favour of “NSIC LTD. A/C NTSC, Chennai”, ( SC / ST are exempted ) to the above address by 20th April, 2013.
• Batches Commencing From : 06th May, 2013.
• Hostel facility available for men only.
• Intimation will be sent to the candidates by Email / Phone / post.

NSIC Chennai Admission Eligibility :

SI.No.	Course	Fees	Duration	Eligibility Criteria
1.	PLC, SCADA with Calibration Techniques	7,000/-	6 weeks	BE / Diploma in EEE, EE, E&I
2.	Embedded Design using RTOS	12,000/-	3 Months	BE / Diploma in EEE / ECE / CS
3.	Advanced Networking using CISCO routers	10,000/-	2 Months	Any degree
4.	Low Power Micro Controllers and sensors interfacing	2,000/-	1 week	Final year BE / Diploma in Electronics
5.	Introduction to Product Design using 3D Scanning and CMM Techniques ( Reverse Engineering Techniques )	2,000/-	1 week	Deg. / Dip. In Mech Engg. / D'Man ( Mech )
6.	3D Design using CAD software CATIA or Solid Works	6,000/-	4 weeks	Deg. / Dip. In Mech Engg./ D'Man ( Mech )
7.	3D Design and Modeling Using Solid Works / or Unigraphics or CATIA or Inventor or Pro - E	6,000/-	4 weeks	Deg. / Dip. In Mech Engg./ D'Man ( Mech )
8.	CNC Programming & Operation ( Milling & Turning )	7,000/-	6 weeks	BE / Dip in Mech. Aeronautics, Automobile & ITI
9.	CAD and CAM using Unigraphics	9,000/-	4 weeks	Deg. / Dip. In Mech Engg../ D'Man
10.	Energy Management with Calibration techniques	7,000/-	4 weeks	BE / Diploma in EEE, EE, E & I, Mech
11.	Calibration on Pressure, Thermal & Electro Technical Parameters	4,000/-	2 weeks	Deg. / Dip. / ITI In Engg
12.	Machinist / Turner / Fitter / Electrician ( non - ITI )	5,000/- Each	1 year each	10 std. Pass / Fail

 

Computer Courses

NSIC Technical Services Centre Admission 2013

’Near’ Govind Puri metro station,
Okhla phase – III,
New delhi – 20,
Contact No : 011 – 26382236, 9013124481,
Mobile No. : 9911100465, 9868921189,
Website : www.nsic.co.in.

NSIC Okhla New Delhi Courses 2013 :

Sr. No.	Course Title	Duration	Fee in
1.	Advance Diploma in Software Technology	2Years	35, 000/-
2.	Advance Diploma in Computer Hardware and Networking	15 Months	27, 000/-
3.	DOEACC’S “O’' Level	1 Year	18, 000/-
4.	Computer Hardware & Networking ( Chip Level )	1 Year	17, 000/-
5.	Advance Electronic Mechanic	1 Year	12, 000/-
6.	Embedded system ( 1086 Micro processor / Micro controller )	3 Months	15, 000/-
7.	Advance Networking	6 Months	15, 000/-
8.	Diploma in Computer Application ( DCA )	6 Months	10, 000/-
9.	DOT NET Technologies	3 Months	10, 000/-
10.	Accounting Fundamentals & Tally - 9	3Months	8, 000/-
11.	MCP & CCNA	80Hours	6, 000/-
12.	CCNA	80Hours	5, 000/-
13.	Linux Administration	80 Hours	5, 000/-
14.	Laptop Repair	80 Hours	5, 000/-
15.	Mobile Phone Repair	80 Hours	6, 000/-
16.	MS-Office & internet / DTP	40Hours	2, 500/-
17.	C, C++ & OOPS	40 Hours	3, 500/-
18.	Core Java	40 Hours	4, 000/-
19.	Advance Java	40Hours	5, 000/-
20.	Tally - 9	40Hours	2, 500/-

For more details please refer to the website or contact on the phone numbers given below Admission may be taken on first come first serve basis by submitting bio-data along with certificates copy and fee by cash or DD in favor of NSIC LTD. – NTSC A/C. Service tax @12.38% will be charged extra. Reservation available for SC / ST / OBC / P.H. as per rules.

 

January & February 2013

NSIC Technical Services Centre Admission 2013

Okhla, Pharse III,
New Delhi – 110 020, India,
Phone No. : 011 – 26921562, 41009357,
Mobile No. : 08826731030, 09971925196,
Email : ntscok@nsic.co.in,
Website : www.nsic.co.in.

NSIC Technical Services Centre New Delhi invites application from eligible  candidates for admission to Skill Upgradations Training programs 2013 :

Sl.No	Course Name	Fee & Eligibility
1.	Post Diploma in CAD / CAM ( Based on Auto CAD + CNC + any two Pro / CATIA / UG )	35,000/- ( For Diploma / Degree in Mech / Prod. / Automob. / Plastic )
2.	CAD / CAM ( Based on Pro - E / CATIA / UG )	15,000/- for each ( For Dip. / Deg. in Mech. / Prod. / Automob. )
3.	CAD ( Based on AutoCAd + optional with 3D Max )	6000/- ( 8000/- with Max ) ( For ITI - D / Man or Dip. / Deg. in Mech. / Prod. / Automob. / Plastics / Civil / Arch. )
4.	Engineering Drawing with CAD / Optional with 3D Max	9000/- ( 11,000/- with Max ) ( For 10th Pass / or relevent experience )
5.	Engineering Drawing ( Based on Manual Drafting ) ( Mechanical / Civil )	5000/- ( For 10th Pass / pr relevant experience )
6.	CNC Programming & Operation	5000/- ( For ITI - Mechinist / Turner or Dip. / Deg. in Mech. / Prod. / Automob. / or relevant experience )

• NSIC Admission may be taken on first come first serve basis by submitting bio – data along with certificate copies and fee by cash or DD in favour of “NSIC Ltd. – NTSC A/c”.
• Service tax as applicable will be charged extra. Reservation for SC / ST / OBC / PH as per rules.
• Batches : January, 2013 to February, 2013.

 

 

TAGS: Admission Last Date, Batches Commencing Date, NSIC Admission, NSIC Chennai Admission, NSIC Okhla Admission, Skill Development Training Programs

Admission Notification Related : NSIC Skill Development Training Programs 2013, NSIC Eligibility for Skill Development Training Programs 2013, Admission Notice NSIC Technical Services Centre, NSIC Technical Services Centre Admission 2013, Admission in NSIC Technical Services Centre 2013, NSIC Application Form 2013, NSIC Batch Commencing Date 2013, NSIC Training Program Admission 2013, NSIC Address, NSIC Website, NSIC Technical Services Centre Chennai Admission 2013, NSIC Technical Services Centre Admission Procedure 2013, NSIC Chennai Courses 2013, NSIC Admission Announcement 2013,

Posted In admission notification : Leave a response for nsic technical services centre admission 2013 by srinevaasan

12 Responses to “NSIC Technical Services Centre Admission 2013”

• iam kompelly raghu bsc chemestry comeplit so iam applying for the course skills develoment and any techenical course may villeg;machuphad mandel;narmetta distic warangal pin;506244 cell;9000527215

  By kompelly raghu from i on April 26, 2012 at 9:55 pm
• skill dovelpment techenical coures

  By kompelly raghu from indian on April 29, 2012 at 2:53 pm
• is there compalsary demand draft 250 rs. for sc/st student

  By hemant ratnakar from KOLKATA,WEST BENGAL on May 10, 2012 at 5:06 pm
• i have applied for the course of computer hardware& networking. so i want to know the status in detail.

  By parmeshwar kumar mandal from deoghar(jharkhand) on October 8, 2012 at 3:01 pm
• I AM APPLYING FOR THE COURSE OF MACHINIST/TURNER/FITTER/ELECTRICIAN. SO, I WANT TO KNOW THE STATUS IN DETAILS.

  By ASHOK KUMAR from KOLKATA,WEST BENGAL on October 21, 2012 at 7:03 pm
• please give me admission schedule for computer software diplomas. like as networking , java development , oracle 10g/11g D.B.A. etc.

  By abdul from meerut , (U.P.) on December 2, 2012 at 9:32 am
• CAD systems use a computer with terminals featuring video monitors and interactive graphics-input devices to design such things as machine parts, patterns for clothing, or integrated circuits. CAM systems use numerically controlled (see numerical control) machine tools and high-performance programmable industrial robots. Drawings developed during the design process are converted directly into instructions for the production machines, thus optimizing consistency between design and finished product, and providing flexibility in altering machine operations

  By Cad Cam Services on December 26, 2012 at 9:57 am
• sir/mam i want to know the date and timing for embedded system design course...

  By Divya from vellore on January 10, 2013 at 6:47 pm
• i want to admin in ur institute

  By Sandeep Kumar from Bilaspur (HP) on February 12, 2013 at 12:11 pm
• Respected sir. I ame MAHTAB ALAM B.TECH(E&I) pass out student and want apply for PLC,SCADA,CALIBRATION COURS of six week but i ame waiting for back paper result of two subjects theese are Digital electonics of 4th sem and Modern control system of 5th sem. i ame from TANDA,Ambedkar Nagar.Uttar Pradesh(UP) 9

  By mahtab alam from I ame MAHTAB ALAM want to do the plc,scada,calibration, cours of six week on February 23, 2013 at 7:35 pm
• sir/mam i want to doing embedded system design course in july...so plzz sir/mam when i am apply for embedded system & also know the date and timing...thank you

  By Ankush Jain from Bhopal on March 18, 2013 at 7:20 pm
• sir/mam i want to join classes for embedded design n advanced networking after june

  By vasundhara from indore (M.P) on March 23, 2013 at 3:49 am