Engineering Medical

GCET 2018

Important : Admissions to MBBS, BDS, BHMS, BAMS, Allied Health Sciences ( Para Medical ) & B.Sc. in Nursing Courses shall be based on NEET ( National Entrance cum Eligibility Test ) – 2018 to be conducted by CBSE and eligibility criteria prescribed by respective regulatory authority.

Goa CET Admissions to B.Arch. course shall be on the basis of scores obtained at NATA ( National Aptitude Test in Architecture ), conducted by Council of Architecture, and qualifying exam ( Std. XIIth / HSSC. )

Directorate of Technical Education, Government of Goa shall conduct Goa Common Entrance Test – GCET 2018 for admissions to Professional Degree Courses in MBBS, BDS, BHMS, B.A.M.S., B.E. B.Arch & B.Pharm. Allied Health Sciences ( B.P.T., B.O.T., B.Opt., B.Sc.M.I.T., B.Sc.A.T. ) B.Sc. in Nursing in the State of Goa for the academic year 2018 – 19.

GCET Entrance Exam 2018

Directorate of Technical Education, Government of Goa shall conduct Goa Common Entrance Test – GCET 2018 for admissions to Professional Degree Courses in MBBS, BDS, BHMS, B.A.M.S., B.E. B.Arch & B.Pharm. Allied Health Sciences ( B.P.T., B.O.T., B.Opt., B.Sc.M.I.T., B.Sc.A.T. ) B.Sc. in Nursing in the State of Goa for the academic year 2018 – 19.

GCET 2018 Exam Pattern

  • Each paper will consist of 75 ( Seventy Five ) questions to be answered in two hours. ( One hundred & twenty minutes ).
  • Each question shall have four choices for answers, out of which only one shall be correct.
  • Correct answer shall carry one mark for each question. There will be no negative marking for wrong / multiple answers

To know more about GCET Entrance Exam Click Here

GCET 2018 Eligibility

Goa CET admission to Professional Degree courses included in this prospectus, an applicant must fulfil the following criteria :

Nationality

GCET admission to professional courses in State of Goa is open to Indian nationals fulfilling the eligibility criteria under various categories. Non – resident Indians holding Indian passport may also apply for seats reserved under NRI category. Overseas Citizens of India ( OCI ) / Persons of Indian Origin ( PIO ) cardholders are considered eligible for admissions to seats under NRI Category only. Foreign Nationals must apply to Government of India.

Age Limit

An applicant to Degree courses in Medicine, Dentistry, Homoeopathy, Ayurveda, Allied Health Sciences and Nursing must have competed the age of 17 years on or before 31st December of the academic year of admission to become eligible for admission to First Year. No age limit, minimum or maximum, is specified for admission to Engineering, Pharmacy and Architecture.

Valid Score at Goa CET 2018

An applicant for Degree courses in Medicine, Dentistry, Engineering, Pharmacy, Homoeopathy, Ayurveda, Allied Health Sciences and Nursing must have appeared and obtained valid score at the Goa Common Entrance Test GCET conducted by Government of Goa for the year of admission. GCET score of the previous year/s shall not be valid. For Medicine and Dentistry Degree courses, minimum GCET score should be 50% ( 40% in case of SC / ST / OBC and 45% for applicants belonging to PH category. ) aggregate in specified subjects. No minimum limit is specified for other courses. An applicant for Degree Course in Architecture must have appeared and obtained valid score at NATA conducted by Council of Architecture.

Qualifying Examination & Minimum Marks

An applicant must have passed the Higher Secondary School Certificate Examination of the Goa Board or an examination conducted by the Central Board of Secondary Education, New Delhi, or any other examination, which in scope and standard, is deemed to be equivalent to the H.S.S.C. examination of Goa Board, and must have obtained the minimum percentage of marks in the specific subjects, as prescribed for the admission to respective professional courses, as under.

First Year MBBS, BDS, BHMS, BAMS, AHS & B.Sc. in Nursing :

Admissions to MBBS, BDS, BHMS, BAMS, Allied Health Sciences ( Para Medical ) & B.Sc. in Nursing Courses shall be based on NEET ( National Entrance cum Eligibility Test ) – 2018 to be conducted by CBSE and eligibility criteria prescribed by respective regulatory authority.

First Year B.E

The applicant should have passed the Higher Secondary School Certificate ( Std.XIIth ) examination of the Goa Board of Secondary and Higher Secondary Education or its equivalent examination with English, Physics and Mathematics as compulsory subjects with one of the following subjects Chemistry / Bio – Technology / Computer Science / Biology, and secured not less than 45% marks in the aggregate of subjects of Physics & Mathematics with one of the following subjects Chemistry / Bio – Technology / Computer Science / Biology. ( 40% for the applicants belonging to SC, ST and OBC only ).

First Year B.Pharm

The applicant should have passed the Higher Secondary School Certificate ( Std.XIIth ) examination of the Goa Board of Secondary and Higher Secondary Education or its equivalent examination with English, Physics and Chemistry as compulsory subjects with one of the following subjects Mathematics / Bio – Technology / Computer Science / Biology, and secured not less than 45% marks in the aggregate of subjects of Physics & Chemistry with one of the following subjects Mathematics / Bio – Technology / Computer Science / Biology. ( 40% for the applicants belonging to SC, ST and OBC only ).

First Year B.Arch

The applicant should have passed the Higher Secondary School Certificate ( Std.XIIth ) examination of the Goa Board of Secondary and Higher Secondary Education or its equivalent examination with Mathematics as one of the subjects and secured at least 50% marks in aggregate ( 45% aggregate marks for applicants belonging to SC / ST / OBC ). OR 10+3 Diploma ( any stream ) recognised by Central / State Governments with 50% aggregate marks. OR

International Baccalaureate Diploma, after 10 years of schooling, with not less than 50% marks in aggregate and with Mathematics as compulsory subject of examination.

Applicants scoring minimum 80/200 at NATA will be eligible for admission to B.Arch., provided NATA score is obtained by answering NATA exam before last date of submission of admission form.

Kashmiri Migrants Only in Engineering Courses

The applicant should have passed the Higher Secondary School Certificate ( Std.XIIth ) examination or its equivalent examination with English, Physics and Mathematics as compulsory subjects with one of the following subjects Chemistry / Bio – Technology / Computer Science / Biology and secured not less than 45% marks in the subjects of Physics & Mathematics with one of the following subjects Chemistry / Bio – Technology / Computer Science / Biology.

Changes in GCET 2018 Eligibility, if any

In case Medical Council, Dental Council, AICTE, Council of Architecture, Pharmacy Council, Indian Nursing Council, any Court or any other competent authority changes the eligibility conditions / selection procedures and makes it specifically applicable to the admissions of this year, the provisions of the prospectus may be modified accordingly, subject to approval of Government, and the same will be duly notified.

Admission of Eligible Diploma / B.Sc. Degree holders to First Year of Engineering / Pharmacy Degree Courses

Candidates who have passed Diploma in Engineering / B.Sc. Degree with Mathematics as a subject at Std XIIth, with at least 45% marks ( 40% marks in case of candidates belonging to SC / ST / OBC ), shall be eligible for admission to First Year of Engineering Degree Courses, subject to vacancies in First Year, after vacancies at Lateral Entry into Direct Second Year are exhausted. The merit list of such candidates shall be prepared on the basis of aggregate marks scored at qualifying exam. Diploma holders in Pharmacy would be eligible for admissions only to First Year of Pharmacy Degree Course under this provision. Vacant seats under this provision shall first be offered to eligible Diploma holders and then to B.Sc. Degree holders.

Admissions of such candidates into First Year will be subject to vacant seats available at First Year, after offering all available seats during admission rounds to eligible candidates from Merit List based on GCET.

To know more about GCET Eligibility Click Here

GCET 2018 Seats Reservation

Distribution of Engineering Seats ( Total 1230 + 5% Supernumerary TFW )

GROUP CATEGORY GECPCCE RIT DON BOSCO AITD TOTAL
ET ME CIV EE CO IT MI ET IT COME ETIT CO ET COME CID EC ME CO
ESM ( 1% ) 0 1 1 1 0 1 0 1 1 1 0 0 1 0 1 0 1 0 1 1 0 12
NRI ( Upto 5% ) 1 1 1 1 1 1 1 2 3 2 3 3 2 32 3 2 3 2 2 2 41
CSP ( 3% ) 2 2 1 2 2 2 1 2 1 2 2 1 2 2 2 2 2 2 2 1 2 37
SC ( 2% ) 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 2 25
GeneralTFW 33 3 3 3 3 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 62
OPEN 3130 31 30 30 30 13 13 13 13 14 14 13 13 14 14 14 13 14 14 13 384
PH 1 1 1 1 11 1 1 1 1 1 1 1 1 1 1 1 1 1 1 121
FF
0 0 1 0 0 0 1 0 1 0 0 0 1 0 0 0 1 0 0 0 1 6
GN 0 1 0 11 1 0 1 0 1 110 1 1 1 0 1 1 1014
Management Quota 15 15 15 15 15 15 15 15 15 15 15 15 15 15 210
ST ( 12% )OPEN 7 7 7 7 7 6 4 7 6 6 7 7 6 7 7 6 7 6 7 6 7 137
PH 0 0 0 0 1 00 0 0 1 0 0 1 0 0 1 0 1 0 1 1 7
FF 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 00 0 0 0 0 1
GN 0 0 0 0 0 1 0 0 1 0 0 0 1 0 0 0 0 0 0 0 0 3
OBC ( 27% )OPEN 15 15 15 15 15 15 8 15 15 15 15 16 15 16 15 15 15 15 15 16 15 311
PH 1 1 0 1 0 0 0 1 0 1 0 0 0 0 1 0 0 1 0 1 1 9
FF0 0 1 0 0
0 0 0 0 1 0 1 1 0 0 0 1 0 0 0 0 5
GN 0 0 0 0 1 1 0 1 0 0 1 0 0 1 0 1 00 1 0 0 7
Total 63 63 63 63 63 63 32 63 63 63 63 63 63 63 63 63 63 63 63 63 63 1292

T.F.W : AICTE Tuition Fee Waiver Scheme.

GCET Medicine, Dentistry, Pharmacy, Architecuture and Homoeopathy Seats

 Course MBBS BDSB.PHARM
( GCP )

B.PHARM
( PES )

BHMS BAMSB.ARCH
Total Seats 150 40 6060

50 6040
AIQ 22 / 23* 06 - - 8--
State Quota 128 / 127* 34 60 60 42 6040
SC 3 01 1 1 1 11
CSP 4 01
2 2 1 21
1
NRI 2
- 1 1 -1 -
ESM 1 1 1 1 1 71
STOPEN ( ST ) 14 4 7 7 5 -5
ST ( PH ) 1 - - - - 15-
OBC OPEN
34 / 33* 9 15 15 10 110
PH ( OBC ) 1 - 1 1 1 -1
GENERALGEN ( TFW )- - 03 03
-
-
OPEN ( GEN )65 15 29 14+15 MQ 21 14 + 15 MQ#18
PH ( GEN ) 2 1 1 1 1 11
GN ( GEN ) - -
1 1 - 11
FF ( GEN ) 1 1 1 1 1 11

*In alternate years

MQ : Management Quota ( subject to review )

# – Management Quota seats for BAMS Course is subject to approval.

T.F.W : AICTE Tuition Fee Waiver Scheme.

Table Showing Distribution of Seats in allied Health Science Courses & B.Sc. in Nursing

Course Name
Total SeatsSC CSP ESM STOBCGeneral
OPEN PH GNOPEN PH FF GN
BPT 20 1 - 1 3 5 - - 10 - - -
BOT 20 1 - - 3 5 - - 10 - - 1
B.OPT 20 - 1 - 2 5 1 - 10 1 - -
B.Sc.MIT 20 - 1 - 2 5 - 1 10 1- -
B.Sc.AT 20 - 1 - 2 5 - - 11 - 1 -
B.Sc.Nursing 100 2 3 1 12 25 1 1 51 2 1 1

Note :

  • One seat in each Institute, over & above the intake shall be available to Kashmiri Migrants, in Degree courses in Engineering, in any one branch as per the choice of the candidate.
  • ** Vacancies of All India Quota in Medicine & Dentistry shall be filled as per directives of GOI / SCI / MCI.
  • In view of SCI directives total reservation should be less than 50%. Therefore, non – statutory reservations for CSP, NRI, GN categories are restricted.
  • # Refer eligibility criteria as per Medical Council of India regulations.
  • All Seats indicated in table above are subject to continuation of approval by respective regulating bodies viz. MCI / DCI / AICTE / CoA, etc. for year 2018 – 19.
  • In case of increase in intake / starting of new courses/institutions, the number of seats approved at the time of admission, by relevant regulatory body shall be offered for admission, with applicable reservations, during admission rounds.
  • Candidates may refer to provisions related to reservation of seats to various categories, listed at the end.

To know more about GCET Seats Click Here

GCET 2018 Application Form

The Directorate of Technical Education, Government of Goa shall conduct Goa Common Entrance Test 2018 ( GCET  ) for admissions to Professional Degree courses in Medical, Dental, Engineering, Pharmacy, Homeopathy, Ayurveda, Allied Health Sciences and Nursing ( at Institute of Nursing Education ) in the State of Goa, for the academic year 2018 – 19. Admissions to Degree course in Architecture shall be on the basis of NATA as per details given under eligibility.

This prospectus is uploaded on website www.dtegoa.gov.in of the Directorate of Technical Education.

Applicants shall download, print and submit application form for GCET 2018 ( Form A ), at notified locations as per Centre opted, on specified dates, along with application fee of Rupee 1500/- payable vide demand draft drawn in favour of “Director of Technical Education” at Panaji – Goa, on any Scheduled Bank, and three identical photographs as indicated, and other relevant certificates ( self attested photo copies ), to obtain the Photo – Admit Card, from the Admission Committee. Admit cards will be issued only to candidates in person. Applicants shall ensure that the validity of the Demand Draft is atleast 3 months from the date of issue.

The applicant should submit the Application Form (A) for GCET in person at the notified Application Reception Centre as per centre opted, along with a DD of Rupee 1500/- payable in favour of “Director of Technical Education” at Panaji, and three identical photographs as indicated, and obtain the Photo – Admit Card, from the Admission Committee, on the same day.

Incomplete Application Forms shall not be accepted. Application Form for GCET 2018 shall not be accepted by post or through messenger. Forms shall be accepted with additional Late Fee of Rupee 1000/- till scheduled date. Forms shall not be accepted after the last date of submission mentioned in the prospectus.

Goa CET 2018 Modes of Payment of Fees

Following fees are payable through separate bank drafts of any Nationalised or Scheduled bank to the authority mentioned against the payment Rupee 1000/- by Demand Draft drawn in favour of “Director of Technical Education” payable at Panaji or in cash at the time of admission.

To know more about GCET Application Form Click Here

GCET 2018 Exam Centers

Goa Common Entrance Test 2018 shall be held at following centres.

S.No.CentreCodeAddress
1Tiswadi
Cujira ( Bambolim )
10 Dhempe Higher Secondary School of Arts & Science
2Panaji 11Goa College of Pharmacy
3 Verna 12 Fr. Agnel Multipurpose Higher Secondary School
4 Navelim 13 Rosary College / Higher Secondary of Arts & Commerce
5 Vasco 14 Deep Vihar High School
6 Mapusa 15 Purushottam Walawalkar Higher Secondary School
7 Ponda - 1 16 A.J. De Almeida High School
8 Ponda ( Farmagudi ) 17 G.V. Ms. Smt. N.J. Aguiar Higher Secondary School
9 Bicholim 18 Narayan Zantye College of Commerce
10 Curchorem19 Smt. Chandrabhaga T. Naik Higher Secondary School
11Porvorim 20 Vidya Prabodhini Higher Secondary School
12 Assagao21 DM’s PVS Sarojini M. Kushe Higher Secondary School
13Sanquelim 22 Government Higher Secondary School
14Cuncolim 23Maria Bambina Higher Secondary School
15Dharbandora 24BBSS, Vishweshwar Shankar Laad Higher Secondary School

GCET Physics Syllabus 2018

Unit I : Electrostatics

Electric charges and their conservation. Coulomb’s law – force between two point charges, forces between multiple charges; superposition principle and continuous charge distribution.

Electric field, electric field due to a point charge, electric field lines; electric dipole, electric field due to a dipole; torque on a dipole in a uniform electric field. Electric flux, statement of Gauss’s theorem and its applications to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell ( field inside and outside ).

Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charges; equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipoles in an electrostatic field.

Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric polarisation, capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a capacitor, Van de Graaff generator.

Unit II : Current Electricity

Electric current, flow of electric charges in a metallic conductor, drift velocity and mobility, and their relation with electric current; Ohm’s law, electrical resistance, V – I characteristics ( linear and non – linear ), electrical energy and power, electrical resistivity and conductivity.

Carbon resistors, colour code for carbon resistors; series and parallel combinations of resistors; temperature dependence of resistance.

Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in parallel. Kirchhoff ’s laws and simple applications. Wheatstone bridge, metre bridge.

Potentiometer – principle and applications to measure potential difference, and for comparing emf of two cells; measurement of internal resistance of a cell.

Unit III : Magnetic Effects of Current and Magnetism

Concept of magnetic field, Oersted’s experiment. Biot – Savart law and its application to current carrying circular loop. Ampere’s law and its applications to infinitely long straight wire, straight and toroidal solenoids. Force on a moving charge in uniform magnetic and electric fields. Cyclotron.

Force on a current – carrying conductor in a uniform magnetic field. Force between two parallel current – carrying conductors – definition of ampere. Torque experienced by a current loop in a magnetic field; moving coil galvanometer – its current sensitivity and conversion to ammeter and voltmeter.

Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole moment of a revolving electron. Magnetic field intensity due to a magnetic dipole ( bar magnet ) along its axis and perpendicular to its axis. Torque on a magnetic dipole ( bar magnet ) in a uniform magnetic field; bar magnet as an equivalent solenoid, magnetic field lines; Earth’s magnetic field and magnetic elements.

Para -, dia – and ferro – magnetic substances, with examples.

Electromagnets and factors affecting their strengths. Permanent magnets.

Unit IV : Electromagnetic Induction and Alternating Currents

Electromagnetic induction; Faraday’s law, induced emf and current; Lenz’s Law, Eddy currents. Self and mutual inductance.

Alternating currents, peak and rms value of alternating current / voltage; reactance and impedance; LC oscillations ( qualitative treatment only ), LCR series circuit, resonance; power in AC circuits, wattles current. AC generator and transformer.

Unit V : Electromagnetic Waves

Idea of displacement current. Electromagnetic waves and their characteristics ( qualitative ideas only ). Transverse nature of electromagnetic waves.

Electromagnetic spectrum ( radio waves, microwaves, infrared, visible, ultraviolet, x-rays, gamma rays ) including elementary facts about their uses.

Unit VI : Optics

Reflection of light, spherical mirrors, mirror formula. Refraction of light, total internal reflection and its applications, optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens – maker’s formula.

Magnification, power of a lens, combination of thin lenses in contact combination of a lens and a mirror.

Refraction and dispersion of light through a prism.

Scattering of light – blue colour of the sky and reddish appearance of the sun at sunrise and sunset.

Optical instruments : Human eye, image formation and accommodation, correction of eye defects ( myopia and hypermetropia ) using lenses.

Microscopes and astronomical telescopes ( reflecting and refracting ) and their magnifying powers.

Wave optics : Wave front and Huygens’ principle, reflection and refraction of plane wave at a plane surface using wave fronts.

Proof of laws of reflection and refraction using Huygens’ principle.

Interference, Young’s double hole experiment and expression for fringe width, coherent sources and sustained interference of light.

Diffraction due to a single slit, width of central maximum.

Resolving power of microscopes and astronomical telescopes. Polarisation, plane polarised light; Brewster’s law, uses of plane polarised light and Polaroids.

Unit VII : Dual Nature of Matter and Radiation

Photoelectric effect, Hertz and Lenard’s observations; Einstein’s photoelectric equation – particle nature of light.

Matter waves – wave nature of particles, de Broglie relation. Davisson – Germer experiment ( experimental details should be omitted; only conclusion should be explained. )

Unit VIII : Atoms and Nuclei

Alpha – particle scattering experiment; Rutherford’s model of atom; Bohr model, energy levels, hydrogen spectrum. Composition and size of nucleus, atomic masses, isotopes, isobars; isotones.

Radioactivity – alpha, beta and gamma particles / rays and their properties; radioactive decay law.

Mass – energy relation, mass defect; binding energy per nucleon and its variation with mass number; nuclear fission and fusion.

Unit IX : Electronic Devices

Energy bands in solids ( qualitative ideas only ), conductors, insulators and semiconductors; semiconductor diode – I – V characteristics in forward and reverse bias, diode as a rectifier; I – V characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage regulator. Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier ( common emitter configuration) and oscillator. Logic gates ( OR, AND, NOT, NAND and NOR ). Transistor as a switch.

Unit X : Communication Systems

Elements of a communication system ( block diagram only ); bandwidth of signals ( speech, TV and digital data ); bandwidth of transmission medium. Propagation of electromagnetic waves in the atmosphere, sky and space wave propagation. Need for modulation. Production and detection of an amplitude – modulated wave.

Books : Published by Goa Board of Secondary and Higher Secondary Education.

  1. Physics Part I : Textbook for class XII
  2. Physics Part II : Textbook for class XII

GCET Chemistry Syllabus 2018

Unit I : Solid State

Classification of solids based on different binding forces : molecular, ionic covalent and metallic solids, amorphous and crystalline solids ( elementary idea ), unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell, packing in solids, packing efficiency, voids, number of atoms per unit cell in a cubic unit cell, point defects, electrical and magnetic properties, Band theory of metals, conductors, semiconductors and insulators and n and p type semiconductors.

Unit II : Solutions

Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid solutions, colligative properties – relative lowering of vapour pressure, Raoult’s law, elevation of B.P., depression of freezing point, osmotic pressure, determination of molecular masses using colligative properties, abnormal molecular mass, Vant Hoff factor.

Unit III : Electrochemistry

Redox reactions; conductance in electrolytic solutions, specific and molar conductivity variations of conductivity with concentration, Kohlrausch’s Law, electrolysis and laws of electrolysis ( elementary idea ), dry cell – electrolytic cells and Galvanic cells; lead accumulator, EMF of a cell, standard electrode potential, Nernst equation and its application to chemical cells. Relation between Gibbs energy change and EMF of a cell, fuel cells; corrosion.

Unit IV : Chemical Kinetics

Rate of a reaction ( average and instantaneous ), factors affecting rates of reaction : concentration, temperature, catalyst; order and molecularity of a reaction; rate law and specific rate constant, integrated rate equations and half life ( only for zero and first order reactions ); concept of collision theory ( elementary idea, no mathematical treatment ). Activation energy, Arrhenious equation.

Unit V : Surface Chemistry

Adsorption – physisorption and chemisorption; factors affecting adsorption of gases on solids; catalysis : homogenous and heterogeneous, activity and selectivity : enzyme catalysis; colloidal state : distinction between true solutions, colloids and suspensions; lyophillic, lyophobic multimolecular and macromolecular colloids; properties of colloids; Tyndall effect, Brownian movement, electrophoresis, coagulation; emulsions – types of emulsions.

Unit VI : General Principles and Processes of Isolation of Elements

Principles and methods of extraction – concentration, oxidation, reduction electrolytic method and refining; occurrence and principles of extraction of aluminium, copper, zinc and iron.

Unit VII : p – Block Elements

Group 15 Elements : General introduction, electronic configuration, occurrence, oxidation states, trends in physical and chemical properties; nitrogen – preparation, properties and uses; compounds of nitrogen : preparation and properties of ammonia and nitric acid, oxides of nitrogen ( structure only ); Phosphorous – allotropic forms; compounds of phosphorous: preparation and properties of phosphine, halides ( PCI3, PCI5 ) and oxoacids ( elementary idea only ).

Group 16 Elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; dioxygen : preparation, properties and uses; classification of oxides; ozone. Sulphur – allotropic forms; compounds of sulphur : preparation, properties and uses of sulphur dioxide; sulphuric acid : industrial process of manufacture, properties and uses, oxoacids of sulphur ( structures only ).

Group 17 Elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; compounds of halogens : preparation, properties and uses of chlorine and hydrochloric acid, interhalogen compounds, oxoacids of halogens ( structures only ).

Group 18 Elements : General introduction, electronic configuration, occurrence, trends in physical and chemical properties, uses.

Unit VIII : d and f Block Elements

General introduction, electronic configuration, occurrence and characteristics of transition metals, general trends in properties of the first row transition metals – metallic character, ionization enthalpy, oxidation states, ionic radii, colour, catalytic property, magnetic properties, interstitial compounds, alloy formation. Preparation and properties of K2 Cr2 O7 and KMnO4

Lanthanoids – electronic configuration, oxidation states, chemical reactivity and lanthanoid contraction and its consequences.

Actinoids – Electronic configuration, oxidation states and comparison with lanthenoids.

Unit IX : Coordination Compounds

Coordination compounds : Introduction, ligands, coordination number, colour, magnetic properties and shapes, IUPAC nomenclature of mononuclear coordination compounds, bonding, Werner’s theory VBT, CFT; isomerism ( structural and stereo ) importance of coordination compounds ( in qualitative analysis, extraction of metals and biological systems ).

Unit X : Haloalkanes and Haloarenes

  • Haloalkanes : Nomenclature, nature of C-X bond, physical and chemical properties, mechanism of substitution reactions. Optical rotation.
  • Haloarenes : Nature of C-X bond, substitution reactions ( directive influence of halogen for monosubstituted compounds only ).
  • Uses and environmental effects of – dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.

Unit XI : Alcohols, Phenols and Ethers

  • Alcohols : Nomenclature, methods of preparation, physical and chemical properties ( of primary alcohols only ); identification of primary, secondary and tertiary alcohols; mechanism of dehydration, uses, with special reference to methanol and ethanol.
  • Phenols : Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophillic substitution reactions, uses of phenols.
  • Ethers : Nomenclature, methods of preparation, physical and chemical properties, uses.

Unit XII : Aldehydes, Ketones and Carboxylic Acids

  • Aldehydes and Ketones : Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical properties, and mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes; uses.
  • Carboxylic Acids : Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses.

Unit XIII : Organic compounds containing Nitrogen

  • Amines : Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses, identification of primary secondary and tertiary amines.
  • Cyanides and Isocyanides – will be mentioned at relevant places in context.
  • Diazonium salts : Preparation, chemical reactions and importance in synthetic organic chemistry.

Unit XIV : Biomolecules

  • Carbohydrates – Classification ( aldoses and ketoses ), monosaccharide ( glucose and fructose ), D – L configuration, oligosaccharides ( sucrose, lactose, maltose ), polysaccharides ( starch, cellulose, glycogen ) : importance.
  • Proteins – Elementary idea of α – amino acids, peptide bond, polypeptides, proteins, primary structure, secondary structure, tertiary structure and quaternary structure ( qualitative idea only ), denaturation of proteins; enzymes.
  • Hormones – Elementary idea ( excluding structure ).
  • Vitamins – Classification and functions.
  • Nucleic Acids : DNA and RNA

Nucleic Acids – DNA & RNA .

Unit XV : Polymers

Classification – Natural and synthetic, methods of polymerization ( addition and condensation ), copolymerization. Some important polymers: natural and synthetic like polythene, nylon, polyesters, bakelite, rubber. Biodegradable and non – biodegradable polymers.

Unit XVI : Chemistry in everyday life

  • Chemicals in medicines – analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamines.
  • Chemicals in food – preservatives, artificial sweetening agents, elementary idea of antioxidants.
  • Cleansing agents – soaps and detergents, cleansing action.

Books : Published by Goa Board of Secondary and Higher Secondary Education.

  1. Chemistry Part I : Textbook for class XII
  2. Chemistry Part II : Textbook for class XII

GCET Mathematics Syllabus 2018

Unit – I : Relations and Functions

Relations and Functions :

Types of relations : reflexive, symmetric, transitive and equivalence relations. One to one and onto functions, composite functions, inverse of a function. Binary operations.

Inverse Trigonometric Functions : Definition, range, domain, principal value branches. Graphs of inverse trigonometric functions. Elementary properties of inverse trigonometric functions.

Unit – II : Algebra

Matrices :

Concept, notation, order, equality, types of matrices, zero matrix, transpose of a matrix, symmetric and skew symmetric matrices. Addition, multiplication and scalar multiplication of matrices, simple properties of addition, multiplication and scalar multiplication. Non – commutativity of multiplication of matrices and existence of non-zero matrices whose product is the zero matrix. Concept of elementary row and column operations. Invertible matrices and proof of the uniqueness of inverse, if it exists; ( Here all matrices will have real entries ).

Determinants :

Determinant of a square matrix ( up to 3 × 3 matrices ), properties of determinants, minors, co factors and applications of determinants in finding the area of a triangle. Adjoint and inverse of a square matrix. Consistency, inconsistency and number of solutions of system of linear equations by examples, solving system of linear equations in two or three variables ( having unique solution ) using inverse of a matrix.

Unit – III Calculus

Continuity and Differentiability :

Continuity and Differentiability Continuity and differentiability, derivative of composite functions, chain rule, derivatives of inverse trigonometric functions, derivative of implicit function. Concepts of exponential, logarithmic functions. Derivatives of loge x and ex Logarithmic differentiation. Derivative of functions expressed in parametric forms. Second order derivatives. Rolle’s and Lagrange’s Mean Value Theorems ( without proof ) and their geometric interpretations.

Applications of Derivatives :

Applications of derivatives : Rate of change, increasing / decreasing functions, tangents and normals, approximation, maxima and minima ( first derivative test motivated geometrically and second derivative test given as a provable tool). Simple problems ( That illustrate basic principles and understanding of the subject as well as real – life situations ).

Integrals :

Integration as inverse process of differentiation. Integration of a variety of functions by substitution, by partial fractions and by parts, only simple integrals of the type –

GCET Maths

to be evaluated.

Definite integrals as a limit of a sum. Fundamental Theorem of Calculus ( without proof ). Basic properties of definite integrals and evaluation of definite integrals.

Applications of the Integrals :

Applications in finding the area under simple curves, especially lines, arcs of circles / parabolas / ellipses ( in standard form only ), area between the two above said curves ( The region should be clearly identifiable ).

Differential Equations :

Definition, order and degree, general and particular solutions of a differential equation. Formation of differential equation whose general solution is given. Solution of differential equations by method of separation of variables, homogeneous differential equations of first order and first degree. Solutions of linear differential equation of the type –

GCET Maths

Unit – IV : Vectors and Three – Dimensional Geometry

Vectors :

Vectors and scalars, magnitude and direction of a vector. Direction cosines / ratios of vectors. Types of vectors ( equal, unit, zero, parallel and coplanar vectors ), position vector of a point, negative of a vector, components of a vector, addition of vectors, multiplication of a vector by a scalar, position vector of a point dividing a line segment in a given ratio. Scalar ( dot ) product of vectors, projection of a vector on a line. Vector ( cross ) product of vectors, scalar triple product.

Three – dimensional Geometry :

Direction cosines / ratios of a line joining two points. Cartesian and vector equation of a line, coplanar and skew lines, shortest distance between two lines. Cartesian and vector equation of a plane. Angle between

  1. Two Lines
  2. Two Planes
  3. A line and a plane.

Distance of a point from a plane.

Units – V : Linear Programming

Introduction, related terminology such as constraints, objective function, optimization, different types of linear programming ( L.P. ) problems, mathematical formulation of L.P. problems, graphical method of solution for problems in two variables, feasible and infeasible regions, feasible and infeasible solutions, optimal feasible solutions ( up to three non – trivial constraints ).

Unit VI : Probability

Multiplication theorem on probability. Conditional probability, independent events, total probability, Baye’s theorem. Random variable and its probability distribution, mean and variance of haphazard variable. Repeated independent ( Bernoulli ) trials and Binomial distribution.

Books : Published by Goa Board of Secondary and Higher Secondary Education.

  1. Mathematics Part I : Textbook for class XII
  2. Mathematics Part II : Textbook for class XII

GCET Biology Syllabus 2018

I. Reproduction

Reproduction in organisms : Reproduction, a characteristic feature of all organisms for continuation of species; Modes of reproduction – Asexual and sexual; Asexual reproduction; Modes- Binary fission, sporulation, budding, gemmule, fragmentation; vegetative propagation in plants.

Sexual reproduction in flowering plants : Flower structure; Development of male and female gametophytes; Pollination – types, agencies and examples; Outbreedings devices; PollenPistil interaction; Double fertilization; Post fertilization events – Development of endosperm and embryo, Development of seed and formation of fruit; Special modes – apomixis, parthenocarpy, polyembryony; Significance of seed and fruit formation.

Human Reproduction : Male and female reproductive systems; Microscopic anatomy of testis and ovary; Gametogenesis – spermatogenesis & oogenesis; Menstrual cycle; Fertilisation, embryo development upto blastocyst formation, implantation; Pregnancy and placenta formation ( Elementary idea ); Parturition ( Elementary idea ); Lactation ( Elementary idea ).

Reproductive Health : Need for reproductive health and prevention of sexually transmitted diseases ( STD ); Birth control – Need and Methods, Contraception and Medical Termination of Pregnancy ( MTP );

Amniocentesis; Infertility and assisted reproductive technologies – IVF, ZIFT, GIFT ( Elementary idea for general awareness ).

II. Genetics and Evolution

Heredity and variation : Mendelian Inheritance; Deviations from Mendelism – Incomplete dominance, Co-dominance, Multiple alleles and Inheritance of blood groups, Pleiotropy; Elementary idea of polygenic inheritance; Chromosome theory of inheritance; Chromosomes and genes; Sex determination – In humans, birds, honey bee; Linkage and crossing over; Sex linked inheritance- Haemophilia, Colour blindness; Mendelian disorders in humans– Thalassemia; Chromosomal disorders in humans; Down’s syndrome, Turner’s and Klinefelter’s syndromes.

Molecular Basis of Inheritance: Search for genetic material and DNA as genetic material; Structure of DNA and RNA; DNA packaging; DNA replication; Central dogma; Transcription, genetic code,translation; Gene expression and regulation – Lac Operon; Genome and human genome project; DNA finger printing.

Evolution : Origin of life; Biological evolution and evidences for biological evolution ( Paleontological, comparative anatomy, embryology and molecular evidence ); Darwin’s contribution, Modern Synthetic theory of Evolution; Mechanism of evolution – Variation ( Mutation and Recombination ) and Natural Selection with examples, types of natural selection; Gene flow and genetic dirft; Hardy- Weinberg’s principle; Adaptive Radiation; Human evolution.

III. Biology and Human Welfare

Health and Disease : Pathogens; parasites causing human diseases ( Malaria, Filariasis, Ascariasis, Typhoid, Pneumonia, common cold, amoebiasis, ring worm ); Basic concepts of immunology–vaccines; Cancer, HIV and AIDs; Adolescence, drug and alcohol abuse. Improvement in food production : Plant breeding, tissue culture, single cell protein, Biofortification; Apiculture and Animal husbandry. Microbes in human welfare: In household food processing, industrial production, sewage treatment, energy generation and as biocontrol agents and biofertilizers.

IV. Biotechnology and Its Applications

Principles and process of Biotechnology : Genetic engineering ( Recombinant DNA technology ). Application of Biotechnology in health and agriculture: Human insulin and vaccine production, gene therapy; Genetically modified organisms- Bt crops; Transgenic Animals; Biosafety issues – Biopiracy and patents. Organisms and environment: Habitat and niche; Population and ecological adaptations; Populationinteractions – mutualism, competition, predation, parasitism; Population attributes –growth, birth rate and death rate, age distribution.

Ecosystems : Patterns, components; productivity and decomposition; Energy flow; Pyramids of number, biomass, energy; Nutrient cycling ( carbon and phosphorous ); Ecological succession; Ecological Services– Carbon fixation, pollination, oxygen release.

Biodiversity and its conservation : Concept of Biodiversity; Patterns of Biodiversity; Importance of Biodiversity; Loss of Biodiversity; Biodiversity conservation; Hotspots, endangered organisms, extinction, Red Data Book, biosphere reserves, National parks and sanctuaries.

Environmental issues : Air pollution and its control; Water pollution and its control; Agrochemicals and their effects; Solid waste management; Radioactive waste management; Greenhouse effect and global warming; Ozone depletion; Deforestation; Any three case studies as success stories addressing environmental issues.

Books : Published by Goa Board of Secondary and Higher Secondary Education.

Biology Textbook for Class XIIth

To know more about GCET Syllabus Click Here

GCET 2018 Results

GCET Exam Date

Goa common Entrance Test will be conducted on 8th & 9th May, 2018.

GCET Result Date

Goa common Entrance Test results likely to be declared in the month of June, 2018.

Email Registration for GCET Results 2018

Please keep watching this page, to check your GCET Results 2018…

To know more about GCET Results Click Here

GCET 2018 Important Dates

GCET 2018 Important Dates

SI.No.Event Date
1.Start of receiving of application forms for GCET 2018 ( FORM A ) at Application Reception Centre.March, 2018
2. Last date for receiving forms for GCET 2018 ( FORM A ) at Application Reception Centre & Collecting Admit CardsApril, 2018
3. Last date for receiving of GCET 2018 ( Form A ) at DTE and collecting Admit Cards ( with late fees ) April, 2018
4. Goa CET 2018 Exam Dates8th & 9th May, 2018
5. Result of GCET 2018 ( Expected ) May, 2018
6. Start of receiving of application forms for Admission ( FORM B/ B1 ) at notified locationMay, 2018
7. Last date for receiving forms for Admission ( FORM B/B1 ) at notified locationMay, 2018
8. Display of Eligibility List at GCET 2018 Admission CentreJune, 2018
9. Last date for compliance with deficiencies in eligibilityJune, 2018
10. Display of Provisional Merit List at GCET 2018 Admission CentreJune, 2018
11. Display of Final Merit List at GCET 2018 Admission CentreJune, 2018
12. First Round of GCET 2018 Admission June, 2018
13. Second Round of GCET 2018 Admission July, 2018
14. Extra Round of Admission due to unexpected circumstances ( if required ) As notified in news papers
15.Special Round of Admission to fill vacant seats ( if any ) in MBBS / BDS CoursesSeptember, 2018

GCET Exam Schedule

SubjectDay & DateTime
Physics8th May, 2018 ( Tuesday )10:00 AM to 12:00 Noon
Chemistry8th May, 2018 ( Tuesday )2:00 PM to 4:00 PM
Mathematics9th May, 2018 ( Wednesday )10:00 AM to 12:00 Noon

Note :

  • Directorate of Technical Education reserves the right to modify the schedule of admission, depending upon the exigency of the situations.
  • Goa CET Admission process will start at 10.00 A.M.
  • Admissions to all the courses shall be carried out as scheduled in the Rounds of Admissions specified on Back Cover Page.

Contact Details

Directorate of Technical Education
Alto-Porvorim, Bardez,
Goa. 403 521
Phone No : ( 0832 ) 2416370
Website : www.dtegoa.gov.in.

 

DTE Goa Lateral Entry Admission

DTE Goa Lateral Entry Admission 2017

DTE Goa invites admission application for BPharm and BE Lateral Entry Programs for the academic session 2017 – 2018. DTE Goa Admission shall be done for the following programs :

  1. B. Pharm. admissions for Diploma holders in Pharmacy.
  2. B.E. admissions for eligible Diploma holders in Engineering in the following branches : Mining, Civil, Mechanical and Comp / ELE / ETC / ECE /INFOTECH.
  3. B.E. admissions for B.Sc. Graduates.

DTE Goa Lateral Entry Eligibility 2017

1. Engineering

For being eligible to seek admission to Engineering Degree programmes at Second Year / Third Semester Level included in this prospectus, an applicant must fulfil the following criteria :

1. The candidate must be an Indian National.

2. The candidate must have passed from Polytechnics or colleges in the State of Goa, or as a Goa State nominee, under GOI seats or reciprocal arrangement, if passed Diploma from other States.

3. The candidate must have passed the Diploma in Engineering in the relevant branch with minimum of 45%* ( 40%* in case of SC / ST / OBC# ) aggregate marks at the Diploma course examination conducted by the Goa Board of Technical Education or an equivalent examination, conducted by a recognised Board of Technical Education in India or abroad.

Note : In case of candidates passing Diploma course examination conducted by recognized Boards of Technical Education, other than Goa Board of Technical Education ( BTE ), aggregate marks at Diploma course examination would be computed on the same basis as computed by BTE, Goa. Presently, in case of semester pattern, aggregate marks obtained at final two semester examination ( excluding training marks ) are considered for computing aggregate Diploma marks by BTE, Goa. OR

  • Candidates must have passed Bachelor of Science Degree with Mathematics as a subject at Std. XIIth and with minimum of 45%* ( 40%*in case of SC / ST / OBC# ) marks in the aggregate ( Final Year ) from Goa University.
  • B.Sc. Degree holders are required to pass in the subjects of Engineering Graphics / Drawing and Engineering Mechanics of First Year of Engineering Programme along with Second Year subjects.
  • Vacant seats if any under Lateral Entry in Direct Second Year of Engineering Courses shall be available for admissions to eligible B.Sc. Degree holders, only after all seats are offered first to eligible Diploma holders.

4. Seats remaining vacant, if any, after admitting all the candidates from the merit list of students passing Diploma / Degree from the State of Goa shall be available to the candidates who have passed Diploma / Degree from other States, in order of merit, provided that they fulfil other eligibility criteria as given in this prospectus.

2. Pharmacy

  1. Candidate must be an Indian National.
  2. Candidate must have passed the Diploma in Pharmacy with minimum 45%* ( 40%* in case of SC / ST / OBC# ) aggregate marks ( Second Year ) from Board of Technical Education, Goa, including specified practical training. Application forms from candidates who have not completed their practical training will be provisionally accepted. However, they shall be considered eligible for admissions, only after completion of specified Practical Training.
  3. Candidate must have passed the Diploma course from Goa College of Pharmacy, Panaji, Goa.
  4. The D. Pharm. Students admitted under above provision to Second Year B. Pharm Science course will have to appear and pass in subjects, as specified by Goa University.
  5. Candidate who has passed Diploma from other States shall be eligible only for the seats remaining vacant after admitting all the candidates from Goa, only if he / she fulfils other eligibility criteria.

3. Admission of Eligible Diploma / B.Sc. Degree holders to vacant First Year Seats in Engineering / Pharmacy

Candidates who have passed Diploma in Engineering / B.Sc Degree with Mathematics as a subject at Std XIIth, with at least 45%* marks ( 40%* marks in case of candidates belonging to SC / ST / OBC# ), shall be eligible for admission to First Year of Engineering Degree Courses subject to vacancies in First Year, after vacancies at Lateral Entry are exhausted. Merit list of such candidates shall be prepared as per provision under ‘Guidelines for merit list’. Vacant seats under this provision shall first be offered to eligible Diploma holders and then to B.Sc. Degree holders.

Diploma holders in Pharmacy are eligible for admissions to First Year of Pharmacy Degree Course under this provision.

To know more about DTE Goa Lateral Entry Eligibility Click Here

DTE Goa Lateral Entry Reservation of Seats

1.  Engineering Courses and Intake 

Sr. No.Name of DisciplineCollegeNo. of Seats
1.Civil EngineeringGEC12
DBE9+3*
2.Mechanical EngineeringGEC12
PCC9+3*
DBE9+3*
AITD9+3*
3.Electrical & Electronics EngineeringGEC12
4.Electronics & Telecommunication EngineeringGEC12
PCC9+3*
RIT9+3*
DBE9+3*
Electronics & Communication EngineeringAITD9+3*
5.Computer EngineeringGEC12
PCC9+3*
RIT9+3*
DBE9+3*
AITD9+3*
6.Information TechnologyGEC12
PCC9+3*
RIT9+3*
7.Mining EngineeringGEC6
TOTAL204+42*

* Management Quota seats at PCC, RIT, DBE & AITD ( Subject to review )

Distribution of Seats in Engineering

As per guidelines of AICTE and Goa University, following table provides details on allotment of seats to various Degree Courses in Engineering to which Diploma & B.Sc. Degree holders are eligible.

For Diploma holders in Engineering :

Eligibility to Degree inFrom DiplomaSeat Allotment
BranchTotal Seats AvailableBranch 
Civil Engg.21+3**Civil Engg (GPP, GPB), Construction Engineering,Civil Engg (CT)(APV), Structural Fabrication and Erection Engineering (GPP).21
Mech. Engg.39+9**Mechanical (GPB, GPC, ISBT, GPC, RAC, GPP),Automobile (APV), Production (APV), Shipbuilding
(ISBT), Fabrication Technology and Erection Engineering (GPP), Tool & Die Making (TR&TC)*.
39
(12-GEC, 9- PCC, 9- DBE, 9- AITD)
Electrical & Electronics, Computer, Electronics & Telecommunication / Electronics Communication, Information Technology138 +30**Computer Engg (APV), Electronics Engg(GPP, APV), Industrial Electronics# (GPP), Electronics & Comm (ISBT, APV, GPB), Instrumentation***, Instrumentation & Control (GPP), Medical Electronics (APV)***, Electronics & Telecommunication#, Electrical Engineering (GPP,GPB) Electrical and Electronics (GPC), Electronics & Instrumentation(GPP).138
Mining Engineering6Mining Engg. (GPB)/followed by other Diplomacourses approved by Goa University. (Civil/Mechanical/Electrical)6

  • *Students passing Diploma in Tool & Die Making from year 2004 onwards are only eligible (subject to eligibility provisions of Goa University).
  • **Management quota at PCC, RIT, DBE & AITD (Subject to review)
  • # Eligible for Degree in Electronics & Telecommunications only.
  • ***Not eligible for Degree in Electrical & Electronics

B. For B. Sc. Degree holders : ( Subject to eligibility provisions to be notified by Goa University ).

B.Sc. Degree holders shall be considered for admission to vacant seats, if any, under Direct Lateral entry into Second Year of Degree Course in Engineering, only after filling the seats with eligible students from Diploma Stream.

They shall be eligible for admissions to the following B.E. Degree Courses (as per Goa University norms ).

  1. Electrical & Electronics Engineering
  2. Electronics & Telecommunication
  3. Computer Engineering
  4. Information Technology

Pharmacy Courses and Intake 

S.NoName of DisciplineCollegeNo. of Seats
1B. Pharm.Goa College of Pharmacy12
2B. Pharm.P.E.S.’s Rajaram and Tarabai Bandekar College of Pharmacy9+3*

To know more about DTE Goa Lateral Entry Seats Click Here

DTE Goa Lateral Entry Application Form

All applicants seeking admission must comply with provisions of this prospectus. This prospectus is uploaded on website : www.dtegoa.gov.in of the Directorate of Technical Education.

DTE Goa Applicants shall download, print and submit application form on specified dates,  along with self attested copies of specified documents and application fee of Rupee 1200/- payable vide Demand draft drawn in favour of “Director of Technical Education” at Panaji – Goa, on any Scheduled Bank, or any other approved mode of remittance, as may be duly notified. Applicants shall ensure that the validity of the Demand Draft is atleast 3 months from the date of issue.

To know more about DTE Goa Lateral Entry Application Click Here

DTE Goa Lateral Entry 2017 Results

DTE Goa Lateral Entry Final Merit List will be displayed on 08th July, 2017

To know more about DTE Goa Lateral Entry Results Click Here

DTE Goa Lateral Entry Important Dates 2017

S.No.EVENTDATE
1Uploading of Prospectus with Admission Form on website31st March, 2017
2Receiving application form at Admission Centre at Porvorim27th June, 2017
3Display of Eligibility List at Admission Centre05th July, 2017
4Last date for compliance with deficiencies in eligibility06th July, 2017
5Display of Provisional Merit List at Admission Centre07th July, 2017
6Display of Final Merit List at Admission Centre08th July, 2017
7First Round of Admission10th July, 2017 (Monday )
8Second Round of Admission22nd July, 2017 ( Friday)
9Extra Round of Admission due to unexpected circumstances (if required)As notified in news papers

DTE Goa Contact Address 

Directorate of Technical Education
Alto-Porvorim, Bardez,
Goa. 403 521
Phone No : ( 0832 ) 2416370
Website : www.dtegoa.gov.in.

 
 

Engineering Medical

Tags ,