Paramedical Courses Counselling

Andhra Pradesh Paramedical Courses Counselling 2012

Counselling for admission to the paramedical courses at Guntur Medical College ( GMC ) was held on 24th August, 2012. All the 30 seats for medical lab technician ( diploma ) course were allotted. Ten out of 10 seats each for medical imaging technology and perfusion technology courses and all six seats for cardiology technician course were allotted.

Other Courses :

Other courses have some vacancies yet to be filled. They are respiratory therapy, anaesthesia, blood bank and electro – cardiograph techniques, radiography and ophthalmology, according to a press release by GMC Principal K.S. Vara Prasad.

 

Method of Selection and Admission

Method of Selection and Admission for Paramedical Courses

Ranking will be made on merit on the basis of marks obtained by the eligible candidates in the prescribed science subjects in the qualifying examinations reduced to the base of 200 marks. The marks obtained through different boards will be taken into account after normalization.

Calculation for All Paramedical Courses

Weighted Total Marks for a maximum 200

Percentage in Biology ( after normalization )                                 ( X )

Percentage in Physics and Chemistry – Taken Together            ( Y ) ( after normalization )

Percentage in Botany and Zoology – Taken Together                  ( Z ) ( after normalization )

Percentage in Mathematics ( after normalization )                       ( W )

Weighted total marks for a maximum of 200 either ( X+Y ) OR ( Z+Y ) OR ( W+Y )

The percentage and the weighted total should be accurate to two decimals.

Ranking of the candidates will be done based on the total marks obtained in the relevant science subjects after normalization of marks computed to a maximum of 200.

The improvement marks of any year in +2 examinations are not valid and only the marks obtained in the first appearance in the qualifying examination will be taken into consideration for the selection and allotment of candidates to Para Medical Courses.

Note :

In respect of the candidates who have taken the subjects of Physics, Chemistry, Biology and Mathematics, the marks obtained in Physics, Chemistry and Biology will be taken into account for arriving the General merit list and for those candidates who have taken Physics, Chemistry, Mathematics along with other subjects (other than Biology, Botany and Zoology) the marks obtained in Physics, Chemistry and Mathematics will be taken into account for arriving the merit list for B. Pharmacy and BASLP courses.

 

Government Paramedical Institutions

List of Government Paramedical Institutions

B. PHARM

  • Madras Medical College, Chennai – 3.
  • Madurai Medical College, Madurai.

B.Sc, ( NURSING )

  • College of Nursing, Madras Medical College, Chennai – 3.
  • College of Nursing, Madurai Medical College, Madurai.
  • College of Nursing, Chengalpattu Medical College, Chengalpattu
  • College of Nursing, Government Mohan Kumaramangalam Medical College, Salem

B.P.T.,

  • Govt. Institute of Rehabilitation Medicine, K.K. Nagar, Chennai – 83.
  • Govt. College of Physiotherapy, Periamilaguparai, Trichy

B.A.S.L.P

  • Madras Medical College, Chennai – 3.

( Note : – Allotment will be made only to the courses and colleges which are approved by AICTE / PCI / NCI / Tamil Nadu Dr. MGR Medical University and Government of Tamil Nadu on the day of counselling ).

 

Govt Paramedical Colleges

Details of Government Para Medical Colleges : B.Pharm – 2011

Date of CounsellingTime of Counselling CategoryRank
27th June, 20139:00 a.mGeneral17767 - 22939

Details of Self Financing Para Medical Colleges : B.Pharm – 2011

Sl.No
Course
Eligibility
Age
Intake Capacity
Duration
Semester Fee in Rupee
Self Sponsored
Industry Sponsored
1
Diploma in Tool Die & Mould Making ( DTDM ) SSC pass with 50% marks ( 40% in case of candidates belonging to SC / ST in aggregate ) 15 - 19
Not born before 13.05.1994 or after 12.05.1998
60
8 semesters
Rupee 15,000
--
2
Diploma in Production Engineering ( DPE ) SSC Pass 15 - 19
Not born before 13.05.1994 or after 12.05.1998
60
6 semesters
Rupee 15,000/-
--
3
Diploma in Electronics & Communication Engineering( DECE ) SSC Pass 15 - 19
Not born before 13.05.1994 or after 12.05.1998
60
6 semesters
Rupee 15,000/-
--
4
Diploma in Automation & Robotics Engineering ( DARE ) SSC Pass 15 - 19
Not born before 13.05.1994 or after 12.05.1998
60
6 semesters
Rupee 15,000/-
--
Post Diploma courses
5
Post Diploma in Tool Design ( PDTD ) DME / LME 27 ( Not born before 13.05.1986 )
32 + 28
1Year
Rupee 16,000/-
Rupee 18,000/-
Post Graduate Courses
6
Master of
Engineering in Mch. CAD /
CAM )
B.E / B. Tech .( M.ech / Prodn / Mechatronics ) with 55%marks
45
20 + 5
2 Years
Rupee 33,500/- + Rupee 6000/- one time Autonomous fee at the time of Admission
Rupee 42,000/- + Rupee 6000/- one time Autonomous fee at the time of Admission
7
Master of Engineering inTool Design ( METD ) B.E /
B.Tech / Prodn with 55% marks
45
20 + 5
2 Years
Rupee 33,500/- + Rupee 6000/- one time Autonomous fee at the time of Admission
Rupee 42,000/- + Rupee 6000/- one time Autonomous fee at the time of Admission
8
Master of Technology in Mechatronics ( M.Tech . Mechatronics ) B.E / B.Tech. ( ECE /
Mech /
EEE / EIE / Aeronautical Engg. / producation /
Automobile / Mechatronics ) with 55% marks
45
20+5
2 Years
Rupee 33,500/- + Rupee 7500/- in I year + 5500/- in II year
Rupee 42,000/- + Rupee 7500/- in I year + 5500/- in II year
9
Post Graduate in Tool , Die & Mould Design
( PGTD )
B.E./
B.Tech .( Mech /
Prodn )
45
32+28
3 Semesters
Rupee 21,000/-
Rupee 26,500/-
10
Post Graduate in CAD. / CAMfor Tool Engineering ( PGCTE ) B.E./
B.Tech.
( Mech / prodn )
45
40
3 Semesters
Rupee 23,000/-
--
11
Post graduate course in Mechatronics ( PGM ) B.E / B.Tech. ( ECE /
Mech / EEE / EIE / Aeronautical Engg./ producation /
Automobile ) with 55% marks
45
40
3 semesters
Rupee 21,000/-
--
12
Post Graduate course in VLSI & Embedded systems ( PGVES ) BE / B.Tech( ECE / EEE / EIE )
45
40
3 semesters
Rupee 23,000/-
--

 
 

One thought on “Paramedical Courses News

  1. sir,i completed ssc 2003.i working as a o.t technician one of hospital.i have o.t technician or anaesthesia technician course. i need one sitting or distance

Leave a Reply

Your email address will not be published. Required fields are marked *